Hufcor, Inc. - Summit® Vertical Lift Operable Partitions

DOWNLOADS
Hufcor innovation takes flexible space management in a completely new direction: UP! Hufcor, the world's most installed brand of operable partitions, introduces the Summit 645V vertical lift operable wall system. Summit's patent-pending lift system takes acoustic operable panels through a narrow...

Category: vertical partitions | vertically folding partitions

MasterFormat: Interior Specialties | Partitions | Operable Partitions...



Hufcor, Inc.
2101 Kennedy Road
P.O. Box 5591
Janesville, WI 53547
Tel: (800) 356-6968
Fax: (608) 758-8253

info@hufcor.com

http://www.hufcor.com/sweets

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview



Summit® Vertical Lift Operable Partitions

Summit® Vertical Lift Operable Partitions

Hufcor innovation takes flexible space management in a completely new direction: UP!

Hufcor, the world's most installed brand of operable partitions, introduces the Summit 645V vertical lift operable wall system. Summit's patent-pending lift system takes acoustic operable panels through a narrow slot and stacks them neatly above the ceiling. The unique, automated lifting device makes operation as simple as pushing a button to provide optimal space division.

Panel Construction

Panels are a nominal 4" [102] thick and to 30" [762] in height. Panel faces are steel laminated to appropriate substrate to meet the STC requirement. Welded steel frames are of minimum 16 gauge [1.42mm] painted steel.

Seals

Sound seals are of tongue and groove configuration, to ensure panel-to-panel alignment and prevent sound leaks between panels. Horizontal panel edges provide a minimum groove appearance. The first panel in the opening features a bottom retractable safety sensor seal providing a minimum of 2" [51] floor adjustability to accommodate out-of-level floors.

Finishes

The standard face finish is factory-applied vinyl; however, optional carpet, fabric, and other custom finishes are available, subject to factory approval for manufacturing compatibility.

IMPORTANT NOTE ABOUT FACE FINISH DIRECTION:

Finishes will be applied to the 645V IN A HORIZONTAL DIRECTION. The finishes provided on most selectors or samples are shown in a vertical position and may look different when applied horizontally.

Exposed metal trim is powder coated in Lamb's Wool, Gray, Brown, or clear anodized aluminum. The matching vinyl seals are available in Lamb's Wool, Gray, or Brown. Custom metal trim colors are available for an upcharge.

Motor and Drive System

Panels are retracted above the ceiling and stored by activating the key-switch control. The motor and drive system automatically extend/retract the panels in the opening. Each panel shall be supported by two guide rollers traveling in vertical guide rails.

Safety Systems

When the operable wall is being lowered (closed), the panels stop if the leading (bottom) edge comes into contact with any object between it and the floor. The operation of the wall may resume once the key switch has been reset and the obstruction cleared.

Lead edge stops and AUTO REVERSES direction. Both motor braking and redundant load arrestor system comes standard on the system.

Acoustics

The partition has been tested at a laboratory accredited by the National Voluntary Laboratory Accreditation Program (NVLAP) and in accordance with ASTM E90 Test Standards. Standard panel construction shall have obtained a minimum STC rating of 51.

FEATURES & BENEFITS

  • Retracts vertically above the ceiling
    Benefit: Floor space is not needed to store the partition when it is not in the opening.
  • Interlocking Seals
    Benefit: Maintains acoustics over time, ensures panel-to-panel alignment, and adds stability to the partition when extended.
  • Contact Sensor Seal
    Benefit: Safety-Stops the downward movement and reverses the partition if it should encounter a person or object.
  • Vertical Guide Rails
    Benefit: Reduces moveable parts and the need for separate motors to seal panel into opening.
    Benefit: Easy access to operating guide rollers and safety limit switches for inspection and repair adjustments.
  • Safety Systems
    Benefit: Primary and secondary safety systems in the event a single safety system would fail.
  • Manual Override of Motor Units
    Benefit: Panels can be lowered if there is a power failure.
  • Electronic, Automatic Operation
    Benefit: Automated operation - reduces setup and operational training time.
  • Durable Welded Steel Frames
    Benefit: Proven durability in tens of thousands of Hufcor installations globally.
  • Single Panel Construction
    Benefit: Fewer moveable parts and aesthetically more appealing, creating a "wow" factor.

Summit BIM Revit family available. Contact your local Hufcor Distributor.

Specifications PDF 645V

Editable Specification RTF: Hufcor 645V Vertical Partition

Hufcor, Inc.
2101 Kennedy Road
P.O. Box 5591
Janesville, WI 53547
Tel: (608) 758-8332
Fax: (608) 758-8253
Tollfree: (800) 356-6968
E-mail: info@hufcor.com
Web site: http://www.hufcor.com/sweets





Sweets app for Revit – Learn More