Hubbell Water Heaters - Model SE Commercial Electric Water Heater

DOWNLOADS
The Hubbell Model SE water heater incorporates a number of features not found in other conventional heaters which makes it better suited to resist the highly corrosive effects of hot water.

Category: electric water heaters | light commercial electric domestic water heaters | water heaters...

MasterFormat: Plumbing Equipment | Electric Domestic Water Heaters | Light-Commercial Electric Domestic Water Heaters



Hubbell Water Heaters
45 Seymour Street
P.O. Box 288
Stratford, CT 06615
Tel: (203) 378-2659
Fax: (203) 378-3593

info@hubbellheaters.com

http://www.hubbellheaters.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Model SE Commercial Electric Water Heater

The Hubbell Model SE water heater incorporates a number of features not found in other conventional heaters which makes it better suited to resist the highly corrosive effects of hot water. The heart of a Hubbell water heater is a superior storage vessel which utilizes a specially formulated Hydrastone cement lining, solid copper-silicon threaded tank openings and a built-in trap device, all of which ensure a longer lasting and energy efficient water heater.
When you specify and install a Hubbell Model SE, you will have confidence in knowing that the owner will be provided with a long lasting, trouble-free source for hot water.


Heavy Duty Construction
  • Hydrastone cement lining provides longer tank life
  • Copper-silicon alloy tappings cannot rust or corrode
  • High impact composite jacket cannot rust or corrode and elimantes damage during installation and transit
High Efficiency
  • Polyurethane foam insulation reduces heat loss
  • Built-in heat trap lowers operating costs
Wide Selection
  • Built to meet your exact needs
  • Numerous options available for specialized applications
Reliable
  • Full five (5) year Non Pro-rated tank warranty is standard
  • Full ten (10) year Non Pro-rated tank warranty can be specified for extended protection

Standard Equipment
  • 1/2" thick Hydrastone cement lining
  • Non-ferrous solid copper-silicon threaded openings for maximum corrosion resistance
  • Magnetic contactor(s) are heavy duty resistive load type rated for 200,000 cycles
  • Incoloy sheathed immersion heating elements
  • Built-in heat trap to improve operating efficiency (3/4" inlet/outlet models only)
  • Surface thermostat 110-170°F range
  • Immersion thermostat (100-190°F) furnished as standard when required due to high recovery versus storage ratio.
    On 6-30 gallon heaters 5 KW and above
    On 40 and 50 gallon heaters over 8 KW
    On 65 gallon heaters over 12 KW
    On 80-120 gallon heaters over 15 KW
  • Surface safety hi-limit cut out with manual reset button (190°F)
  • Immersion safety hi-limit cut out with manual reset button (Standard on heaters 45 KW and above)
  • 1 1/2" Male NPT inlet/outlet connections (Standard on heaters 45 KW and above)
  • ASME/CSA rated temperature and pressure relief valve set at 150 psi, 210°F
  • 2" thick polyurethane foam insulation
  • High impact non-corroding colorized composite protective jacket
  • Cold water inlet diffuser with drain valve

Optional Equipment
  • Full 10 Year Non Pro-Rated tank warranty
  • Low voltage control circuit (fused) transformer
  • Electronic solid state low water cut off
  • Power circuit fusing
  • Immersion thermostat (specify 100-190°F or 30-110°F Range)
  • Immersion adjustable safety hi-limit cut out with manual reset (100-240°F)
  • Solid state electronic digital display temperature controller with multi stage temperature control, low water cut out, and leak detection sensor
  • NSF approved floor mount 6" high legs
  • UL EPH/ANSI NSF tank lining
  • Storage tank constructed from (304L or 316L stainless steel, copper-nickel) for maximum tank life
  • ASME tank construction
  • 1 1/2", 2" Male NPT brass inlet and outlet water connections (heat trap not available)
  • Foam insulation 3" thick for improved operating efficiency
  • Combination temperature and pressure gauge; 2 1/2" dial, 70-250°F, 0-200 psi
  • Upper and lower heating element design for quicker recovery
  • Built-in circuit breaker with or without shunt trip protection
  • Built-in non-fused On/Off disconnect switch
  • Electro-mechanical 7-day time clock with battery back-up
  • Building Management System (BMS) control package for remote operating/alarm capability
  • Horizontal construction, ceiling hung or base mounted
  • NEMA 4 weather resistant construction for installation in "wet" areas
  • Steel wall shelf for 6-40 gallon models
  • Integrally welded seismic attachment points

Please note: optional equipment may impact overall dimensions and weight. Please request submittal drawing from factory.


See More


Specifications

Model SE Water Heater Specifications
Tank: Hydrastone Cement Lined Steel
Capacities: 6 thru 120 Gallons
Orientation: Vertical
Voltages: 208 thru 600 Volt
Phase: 1 Φ and 3 Φ
Inlet Size:
Below 45 KW: 3/4" Female NPT
45 KW and over: 1 1/2" Male NPT
Outlet Size:
Below 45 KW: 3/4" Male NPT
45 KW and over: 1 1/2" Male NPT
Drain Size: 3/4" GHT
Relief Valve Size: 3/4" Female NPT
Relief Valve Type: T&P, 210°F, 150 psi
Hi-Limit: 190°F Manual Reset
Thermostat Range:
Surface: 110-170°F
Immersion: 100-190°F
Design WP: 150 psi
Design TP: 300 psi
Elements: Incoloy Sheathed
Insulation:
Model SE: 2" Polyurethane Foam
Model SM: 3" Polyurethane Foam
Tank Warranty:
Standard: 5 Year Non Pro-Rated
Optional: 10 Year Non Pro-Rated
Electrical Warranty: 1 Year
Jacket: High Impact Colorized Composite
Color: White and Black
Outline Dimensions
Model SE Dimensional Data
Storage Capacity (Gallons) Base Model Number Maximum KW Input Dimensions (Inches) Dimensions (Inches) Dimensions (Inches) Dimensions (Inches) Shipping Weight (lbs.) Optional 3" Foam Insulated Models SM Optional 3" Foam Insulated Models SM
Storage Capacity (Gallons) Base Model Number Maximum KW Input Diameter
"A"
Height
"B"
Floor to Inlet
"C"
Floor to T&P
"D"
Shipping Weight (lbs.) Storage Capacity (Gallons) Diameter "A"
6 SE06 3 15 17.5 5 12.5 115 6 N/A
10 SE10 10 20 21 7 15 145 10 22.75
20 SE20 20 20 33 7 27 175 20 22.75
30 SE30 20 20 41.5 7 34 210 30 22.75
40 SE40 20 20 58.75 7 51 265 40 22.75
50 SE50 20 22.75 51 7 43 295 50 26
65 SE65 58 26 48 8 40 335 65 28
80 SE80 58 26 58 8 51 410 80 28
100 SE100 58 26 69.5 8 62 425 100 28
120 SE120 58 28 69.25 8 62 495 120 30
30 SEU30 20 22.75 33 7 24 215 30 26
40 SEU40 58 26 33 7 24 295 40 28
50 SEU50 58 28 36 7 27 300 50 30
Note: Under counter Models SEU40 and SEU30 hot water oulet is located on the side. Note: Under counter Models SEU40 and SEU30 hot water oulet is located on the side. Note: Under counter Models SEU40 and SEU30 hot water oulet is located on the side. Note: Under counter Models SEU40 and SEU30 hot water oulet is located on the side. Note: Under counter Models SEU40 and SEU30 hot water oulet is located on the side. Note: Under counter Models SEU40 and SEU30 hot water oulet is located on the side. Note: Under counter Models SEU40 and SEU30 hot water oulet is located on the side. Note: Under counter Models SEU40 and SEU30 hot water oulet is located on the side. Note: Under counter Models SEU40 and SEU30 hot water oulet is located on the side. Note: Under counter Models SEU40 and SEU30 hot water oulet is located on the side.
KW Selection Chart With Amperage
Standard Rating KW BTU/HR GPH Recovery at 100°F Rise (°FΔT) Amperage Ratings At Various Voltages Amperage Ratings At Various Voltages Amperage Ratings At Various Voltages Amperage Ratings At Various Voltages Amperage Ratings At Various Voltages Amperage Ratings At Various Voltages Amperage Ratings At Various Voltages Amperage Ratings At Various Voltages
Standard Rating KW BTU/HR GPH Recovery at 100°F Rise (°FΔT) Single Phase Single Phase Single Phase Three Phase Three Phase Three Phase Three Phase Three Phase
Standard Rating KW BTU/HR GPH Recovery at 100°F Rise (°FΔT) 208V 240V 480V 208V 240V 380V 415V 480V
3 10,236 12 14 13 6 8 7 5 4 4
4 13,648 16 19 17 8 11 10 6 6 5
6 20,472 25 29 25 13 17 15 9 8 7
8 27,296 33 39 33 17 22 19 12 11 10
10 34,120 41 48 42 21 28 24 15 14 12
12 40,944 49 58 50 25 33 29 18 17 15
15 51,180 62 72 63 31 42 36 23 21 18
18 61,416 74 87 75 38 50 43 27 25 22
20 68,240 82 96 83 42 56 48 30 28 24
24 81,888 98 115 100 50 67 58 37 33 29
30 102,360 123 144 125 63 83 72 46 42 36
36 122,832 148 173 150 75 100 87 55 50 43
40 136,480 164 192 167 83 111 96 61 56 48
45 153,540 185 216 188 94 125 108 69 63 54
50 170,600 205 240 208 104 139 120 76 70 60
54 184,248 221 260 225 113 150 130 82 75 65
58 197,896 238 279 242 121 161 140 88 81 70
Notes:
1. The KW selections above are shown for convenience. A full selection of KW ratings from 1 to 58 KW is available by simply entering the desired KW into the model number.
2. Units 45 KW and over are supplied with 1 1/2" Male NPT inlet/outlet connections and immersion hi-limit.
3. For alternative voltages, including 220, 277, 440, 460, 575 and 600 volt, please contact us directly for available KW selection.
Notes:
1. The KW selections above are shown for convenience. A full selection of KW ratings from 1 to 58 KW is available by simply entering the desired KW into the model number.
2. Units 45 KW and over are supplied with 1 1/2" Male NPT inlet/outlet connections and immersion hi-limit.
3. For alternative voltages, including 220, 277, 440, 460, 575 and 600 volt, please contact us directly for available KW selection.
Notes:
1. The KW selections above are shown for convenience. A full selection of KW ratings from 1 to 58 KW is available by simply entering the desired KW into the model number.
2. Units 45 KW and over are supplied with 1 1/2" Male NPT inlet/outlet connections and immersion hi-limit.
3. For alternative voltages, including 220, 277, 440, 460, 575 and 600 volt, please contact us directly for available KW selection.
Notes:
1. The KW selections above are shown for convenience. A full selection of KW ratings from 1 to 58 KW is available by simply entering the desired KW into the model number.
2. Units 45 KW and over are supplied with 1 1/2" Male NPT inlet/outlet connections and immersion hi-limit.
3. For alternative voltages, including 220, 277, 440, 460, 575 and 600 volt, please contact us directly for available KW selection.
Notes:
1. The KW selections above are shown for convenience. A full selection of KW ratings from 1 to 58 KW is available by simply entering the desired KW into the model number.
2. Units 45 KW and over are supplied with 1 1/2" Male NPT inlet/outlet connections and immersion hi-limit.
3. For alternative voltages, including 220, 277, 440, 460, 575 and 600 volt, please contact us directly for available KW selection.
Notes:
1. The KW selections above are shown for convenience. A full selection of KW ratings from 1 to 58 KW is available by simply entering the desired KW into the model number.
2. Units 45 KW and over are supplied with 1 1/2" Male NPT inlet/outlet connections and immersion hi-limit.
3. For alternative voltages, including 220, 277, 440, 460, 575 and 600 volt, please contact us directly for available KW selection.
Notes:
1. The KW selections above are shown for convenience. A full selection of KW ratings from 1 to 58 KW is available by simply entering the desired KW into the model number.
2. Units 45 KW and over are supplied with 1 1/2" Male NPT inlet/outlet connections and immersion hi-limit.
3. For alternative voltages, including 220, 277, 440, 460, 575 and 600 volt, please contact us directly for available KW selection.
Notes:
1. The KW selections above are shown for convenience. A full selection of KW ratings from 1 to 58 KW is available by simply entering the desired KW into the model number.
2. Units 45 KW and over are supplied with 1 1/2" Male NPT inlet/outlet connections and immersion hi-limit.
3. For alternative voltages, including 220, 277, 440, 460, 575 and 600 volt, please contact us directly for available KW selection.
Notes:
1. The KW selections above are shown for convenience. A full selection of KW ratings from 1 to 58 KW is available by simply entering the desired KW into the model number.
2. Units 45 KW and over are supplied with 1 1/2" Male NPT inlet/outlet connections and immersion hi-limit.
3. For alternative voltages, including 220, 277, 440, 460, 575 and 600 volt, please contact us directly for available KW selection.
Notes:
1. The KW selections above are shown for convenience. A full selection of KW ratings from 1 to 58 KW is available by simply entering the desired KW into the model number.
2. Units 45 KW and over are supplied with 1 1/2" Male NPT inlet/outlet connections and immersion hi-limit.
3. For alternative voltages, including 220, 277, 440, 460, 575 and 600 volt, please contact us directly for available KW selection.
Notes:
1. The KW selections above are shown for convenience. A full selection of KW ratings from 1 to 58 KW is available by simply entering the desired KW into the model number.
2. Units 45 KW and over are supplied with 1 1/2" Male NPT inlet/outlet connections and immersion hi-limit.
3. For alternative voltages, including 220, 277, 440, 460, 575 and 600 volt, please contact us directly for available KW selection.
Sweets app for Revit – Learn More