Hubbell Water Heaters - Model BWX Semi-Instantaneous Indirect Fired Water Heater

DOWNLOADS
The Model BWX is a fully packaged indirect fired water heater which utilizes boiler water or high temperature hot water (HTHW) as the energy source for heating potable water. The entire package is designed to be a reliable and long lasting source for hot water.

Category: industrial water heaters | process heaters | process water heaters...

MasterFormat: Plumbing Equipment | Domestic Water Heat Exchangers



Hubbell Water Heaters
45 Seymour Street
P.O. Box 288
Stratford, CT 06615
Tel: (203) 378-2659
Fax: (203) 378-3593

info@hubbellheaters.com

http://www.hubbellheaters.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Model BWX Semi-Instantaneous Indirect Fired Water Heater

The Model BWX is a fully packaged indirect fired water heater which utilizes boiler water or high temperature hot water (HTHW) as the energy source for heating potable water. The entire package is designed to be a reliable and long lasting source for hot water. Each component is carefully selected to ensure high performance in even the most demanding application. Whether you are heating potable water in a commercial building or process water in an industrial application, you can select a Hubbell BWX model to do the job. When you specify and install a Hubbell water heater, you will be provided with a quality product that is a long lasting and trouble-free source for hot water.


Reliable
  • Only high grade materials used in construction to ensure long operating life
  • Hydrastone cement lining provides superior protection and tank longevity
  • Heavy duty construction withstands demanding commercial/industrial use
Packaged System
  • Factory selected and sized boiler water control valve simplifies installation and ensures reliable operation
Versatile
  • Full range of styles, sizes, and optional features to meet your exact heating needs
  • Compact design requires minimal floor space

Model BWX Semi Instantaneous Standard Equipment
Vessel Construction
  • Solid 90/10 Copper-Nickel vessel designed and built in strict accordance with the ASME Code Section VIII and stamped, certified, and registered with the National Board of Boiler and Pressure Vessel Inspectors
  • Designed for 150 psi working pressure and hydrostatically tested
Boiler Water Operating Controls
  • Operating controls are factory selected, sized, piped, and tested to ensure reliable operation
  • All components are factory piped and ready for boiler water in and out connections
  • Modulating control valve (2-way, 3-way) to regulate the flow of heating water through the coil. Modulating control valve to be (electric, pneumatic) powered
  • All bronze integral circulating pump
  • Direct mounted boiler water and domestic water temperature and pressure gauges
  • High limit single solenoid safety system closes the boiler water supply to the heating coil should the water temperature in the tank reach the hi-limit set point. Requires 120 volt 5 amp electrical service
Heating Coil
  • Factory sized and installed copper heating coil with a generously sized heating surface designed to ensure reliable operation
  • U-Tube heating coil constructed from single wall copper tubing designed for a maximum working pressure of 150 psi
  • Heavy duty fabricated steel head with threaded NPT inlet and outlet connections
  • All wetted parts are non-ferrous for maximum longevity
  • Non-Ferrous tube sheet
General
  • Heavy duty fiberglass insulation for maximum operating efficiency and minimal stand-by heat loss
  • Heavy gauge painted galvanized steel protective outer jacket
  • Heavy duty integrally welded steel supports for floor mounting
  • Full five (5) year Non Pro-Rated tank warranty and a one (1) year component warranty
  • ASME rated combination T&P relief valve set at the tank working pressure and 210°F

Optional Equipment
Vessel
  • Alternate vessel construction: Stainless Steel Type 304 or 316L, galvanized steel
  • Alternative working pressure: Specify
  • Horizontal Construction
Heating Coil
  • Double wall tubing with a leak detection port
  • Alternate tubing material: (Stainless Steel, 90/10 Copper-Nickel, Admiralty)
  • Fabricated head constructed from: (Stainless Steel, Copper Alloy)
General
  • Type 304 stainless steel protective outer jacket
Operating Controls
  • Boiler water control valve can be factory selected and sized, but shipped loose for in the field installation by others
  • A double solenoid safety system dumps over heated water in the pressure vessel to drain in addition to closing the boiler water supply to the heating coil. Requires 120 volt 5 amp electrical service.


See More


Specifications

Model BWX (Vertical)
Model BWXH (Horizontal)
Vertical Dimensions (Inches)
Model No. Based on 100°F Δ T Recovery Rate (40-140°F)
Base Model Recovery Rating (GPH) BTU/Hr Boiler Water Entering & Exiting Temperatures (°F) Vertical Model BWX Overall Dimensions (Inches) Vertical Model BWX Overall Dimensions (Inches) Vertical Model BWX Overall Dimensions (Inches) Vertical Model BWX Overall Dimensions (Inches) Vertical Model BWX Overall Dimensions (Inches) Vertical Model BWX Overall Dimensions (Inches) Vertical Model BWX Overall Dimensions (Inches) Vertical Model BWX Overall Dimensions (Inches) Vertical Model BWX Overall Dimensions (Inches) Vertical Model BWX Overall Dimensions (Inches) Weight (Lbs)
Base Model Recovery Rating (GPH) BTU/Hr Boiler Water Entering & Exiting Temperatures (°F) Single Wall Single Wall Single Wall Single Wall Single Wall Double Wall Double Wall Double Wall Double Wall Double Wall Weight (Lbs)
Base Model Recovery Rating (GPH) BTU/Hr Boiler Water Entering & Exiting Temperatures (°F) A B C D E A B C D E Weight (Lbs)
BWXCN-600 600 500,000 180-160°F 88 41 28 15 21 101 47 34 17 23 810
BWXCN-600 600 500,000 200-180°F 88 40 29 13 19 100 47 34 15 23 655
BWXCN-900 900 750,000 180-160°F 100 47 34 15 21 90 42 27 19 25 850
BWXCN-900 900 750,000 200-180°F 76 35 22 15 21 89 41 28 17 23 770
BWXCN-1200 1200 1,000,000 180-160°F 100 47 34 15 21 102 48 33 19 25 850
BWXCN-1200 1200 1,000,000 200-180°F 88 41 28 15 21 89 41 28 17 23 810
BWXCN-1500 1500 1,250,000 180-160°F 89 41 28 17 23 102 48 33 19 25 1035
BWXCN-1500 1500 1,250,000 200-180°F 88 41 28 15 21 101 47 34 17 23 810
BWXCN-1800 1800 1,500,000 180-160°F 89 41 28 17 23 108 49 39 20 27 1035
BWXCN-1800 1800 1,500,000 200-180°F 77 35 22 17 23 101 47 34 17 23 985
BWXCN-2400 2400 2,000,000 180-160°F 101 47 34 17 23 108 49 39 20 27 1090
BWXCN-2400 2400 2,000,000 200-180°F 77 35 22 17 23 90 42 27 19 25 985
BWXCN-3000 3000 2,500,000 180-160°F 90 42 27 19 25 111 30 39 22 31 1195
BWXCN-3000 3000 2,500,000 200-180°F 78 36 21 19 25 102 48 33 19 25 1130
BWXCN-3600 3600 3,000,000 180-160°F 90 42 27 19 25 111 50 39 22 31 1195
BWXCN-3600 3600 3,000,000 200-180°F 78 36 21 19 25 96 43 33 20 27 1130
BWXCN-4200 4200 3,500,000 180-160°F 90 42 27 19 25 - - - - - -
BWXCN-4200 4200 3,500,000 200-180°F 78 36 21 19 25 108 49 39 20 27 1130
BWXCN-4800 4800 4,000,000 180-160°F 96 43 33 20 27 - - - - - -
BWXCN-4800 4800 4,000,000 200-180°F 84 37 27 20 27 99 44 33 22 31 1480
BWXCN-6000 6000 5,000,000 180-160°F 99 44 33 22 31 - - - - - -
BWXCN-6000 6000 5,000,000 200-180°F 99 44 33 22 31 - - - - - -
Note: All dimensions are approximate and subject to change. Please reference the submittal drawing for actual dimensions.
Sweets app for Revit – Learn More