Haws Corporation -Freeze Protected Wall Mount Eyewash - 7433FP

DOWNLOADS

Model 7433FP, wall-mounted, freeze protected eyewash with Soft-Flo heads.


Category: 224000 | emergency showers | plumbing fixtures...

MasterFormat: Special Facility Components | Fountains | Emergency Plumbing Fixtures...



Haws Corporation
1455 Kleppe Lane
Sparks, NV 89431
Tel: (888) 640-4297
Fax: (775) 359-7424

customerservice@hawsco.com

https://www.hawsco.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Freeze Protected Wall Mount Eyewash - 7433FP

Freeze Protected Wall Mount Eyewash

Haws emergency eyewash systems, like the freeze protected 7433FP, use anti-surge Soft-Flo heads that activate with the push of a stainless steel flag. Heads come equipped with pop-off dust covers, so when debris is present, the irrigation process stays protected. Space efficient design and integral wall bracket allow the 7433FP to be mounted in a number of easily accessible locations.

  • A great addition to multiple unsafe environments where the eyes may be exposed to corrosive materials
  • Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
  • Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested
  • Fully functional in freezing environments when installed properly
  • All unused water drains out of the unit through a drain valve behind the wall
  • Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment

Prop 65 Warning. For California Residents Warning: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Certifications
  • CSA Certified
Specifications

Model 7433FP freeze protected wall-mounted eyewash shall include a stainless steel 11" (27.9 cm) round bowl, stainless steel eyewash yoke assembly with Soft-Flo ABS plastic eyewash anti-surge heads with integral flow controls and dust covers, self-draining valve, and brass stay-open ball valve equipped with stainless steel ball and stem, and stem extension. Unit to be used with a maximum wall thickness of 12" (30.5 cm) and shall include a self-draining system so all unused water drains out of the unit through a drain valve behind the wall, a chromate protective cast-aluminum wall bracket, universal sign, 1/2" NPT inlet, and 1-1/4" NPT outlet.


See More