Georgia-Pacific Gypsum - DensArmor Plus® Impact-Resistant Interior Panel

DensArmor Plus® Impact-Resistant Interior Panel is a non-paper-faced gypsum panel that is ideal for use in interior areas likely to be exposed to incidental moisture where added abuse, abrasion and impact resistance is desired. The product is ideal for high traffic, high occupancy areas subject...


MasterFormat: Plaster and Gypsum Board | Plaster and Gypsum Board Assemblies | Supports for Plaster and Gypsum Board...



Georgia-Pacific Gypsum
133 Peachtree St., 8th Fl.
Atlanta, GA 30303
Tel: (800) 225-6119

http://www.gpgypsum.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview



DensArmor Plus® Impact-Resistant Interior Panel

DensArmor Plus® Impact-Resistant Interior Panel

DensArmor Plus® Impact-Resistant Interior Panel is a non-paper-faced gypsum panel that is ideal for use in interior areas likely to be exposed to incidental moisture where added abuse, abrasion and impact resistance is desired. The product is ideal for high traffic, high occupancy areas subject to wall or ceiling abuse such as schools, dormitories, offices, hospitals and many public buildings.

The panel consists of a dense, noncombustible, moisture-resistant gypsum core, a strong layer of embedded fiberglass mesh, and an abuse-resistant, coated fiberglass-mat surface. In addition, when tested in accordance with ASTM C 1629, the panel offers superior soft-body and hard-body impact resistance.

For technical assistance, call toll-free in the United States and Canada, 1-800-225-6119.

Summary

DensArmor Plus Impact-Resistant Interior Panel is highly resistant to the growth of mold when tested, as manufactured, per ASTM D 3273.* The panel resists surface abrasion, indentation and impact punctures in high-traffic environments. The moisture-resistant fiberglass mats and core resist warping, rippling and buckling. The core of the product is denser than regular gypsum wallboard and is reinforced with glass fibers, increasing the product's strength and offering improved dimensional stability when compared with regular gypsum wallboard.

It is designed for direct attachment with screws or nails to wood and metal framing or existing surfaces, and may be used as a covering material for flat or curved structures. The field of the board can be finished in the same steps as regular gypsum wallboard. It is manufactured with fiberglass mats with a tapered edge to receive joint treatment.

Learn more about how building with the Dens® Brand family of non-paper-faced fiberglass mat gypsum panels can create a positive ripple effect in your scheduling when pre-rock operations start earlier in the construction cycle.

* The score of 10, in the ASTM D 3273 test, indicates no mold growth in a 4-week controlled laboratory test. The mold resistance of any building product when used in actual job site conditions may not produce the same results as were achieved in the controlled, laboratory setting. No material can be considered mold proof. When properly used with good design, handling and construction practices, DensArmor Plus impact-resistant panel provides increased mold resistance compared to standard paper-faced wallboard products.

For design tools go to www.gpdesignstudio.com.

Georgia-Pacific Gypsum
133 Peachtree St., 8th Fl.
Atlanta, GA 30303
Tel: (800) 225-6119
Web site: http://www.gpgypsum.com





Sweets app for Revit – Learn More