StreetBond® CemBase Asphalt Fortifier
StreetBond® CemBase Asphalt Fortifier is a highperformance cementitious, epoxy-modified acrylic based, waterborne surfacing product designed for application on stamped (textured) asphalt pavements only. StreetBond® CemBase Asphalt Fortifier fortifies asphalt pavement to help resist scuffing on weaker stamped asphalt such as driveways or pathways. StreetBond® CemBase Asphalt Fortifier is worker safe, environmentally safe, creates no unpleasant odors (during or after installation) and meets EPA requirements for Volatile Organic Compounds (VOC). StreetBond® CemBase Asphalt Fortifier and StreetBond® SB150 are fully recyclable with the asphalt. StreetBond® SB150s friction properties are suitable for both pedestrian and vehicular applications.
- StreetBond® CemBase Asphalt Fortifier fortifies asphalt pavement to help resist scuffing on weaker stamped asphalt such as driveways or pathways.
- Applied as the two initial layers in a StreetBond® application over a printed surface that needs fortification.
- StreetBond® CemBase Asphalt Fortifier is combined with StreetBond® Colorants to offer a wide range of colors and can also be combined with StreetBond® Solar Reflective (SR) Colorants to produce a cool pavement surfaces for compliance with LEED specifications for urban heat island mitigation and to provide more comfortable environments.
- StreetBond® CemBase Asphalt Fortifier is applied in two layers as a base coat and must always be covered with at least one layer StreetBond® SB150. For example, if a project would typical require four layers of StreetBond® SB150 on a stamped asphalt surface, a project needing fortification would have two layers of StreetBond® CemBase Asphalt Fortifier applied, followed by two layers of StreetBond® SB150.
| CEMBASE ASPHALT FORTIFIER|
|Volume Solids||60% ±2% [ASTM D2697]|
|Weight Solids||74% ±2% [ASTM D2369]|
|VOC (calculated)||<25 g/L|
|Freeze Point||32°F (0°C)|
|Density||14.2 lb/gal (1.70 g/mL)|
|Mandrel Bend||3/8 @ 21°C|
|Water Absorption||¼ @ 21°C|
|Permeance||13.43g/m² / 24hr/mmHg (52 mils|
|+50°F to 105°F (Ambient) (10°C to 40°C)|
|Drying Time (Touch Dry)||14 hours at 77°F (25°C) and 40% humidity [ASTM D5895]|
|Taber Abrasion (Dry)||0.41 g/100 cycles|
|Taber Abrasion (Wet)||6.92 g/100 cycles|
1 Campus Drive
Parsippany, NJ 07054
Tollfree: (800) 766-3411
Web site: http://www.gaf.com