GAF -Roof Mate Spray Grade Flashing

DOWNLOADS
Description United Coatings ™ Roof Mate Spray Grade Flashing is a light gray, water-based, acrylic elastomeric sealant that is applied to seams, fasteners, flashings, and penetrations. It is designed to be easily applied with an airless sprayer. It has excellent adhesion, flexibility, and...

Category: roof sealants | roofing sealants

MasterFormat: Flashing and Sheet Metal | Joint Protection | Joint Sealants



GAF
1 Campus Drive
Parsippany, NJ 07054
Tel: (800) 766-3411

http://www.gaf.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview



Roof Mate Spray Grade Flashing


Roof Mate Spray Grade Flashing

Description

United Coatings Roof Mate Spray Grade Flashing is a light gray, water-based, acrylic elastomeric sealant that is applied to seams, fasteners, flashings, and penetrations. It is designed to be easily applied with an airless sprayer. It has excellent adhesion, flexibility, and resistance to ultraviolet degradation.

Uses

United Coatings Roof Mate Spray Grade Flashing is designed for use on metal, wood, and concrete. Provides a seal along seams and around fasteners on metal roofs and excellent sealing around curbs and counter flashings. Do not apply at temperatures below 42°F. Substrate temperatures must be below 120°F when applying product.

Advantages

  • A synthetic rubber sealant that cures in the ultraviolet rays of the sun
  • Water based; safer for the environment
  • Strong; forms a flexible seal that will not become brittle
  • Flexible; will expand and contract with metal roof
  • Free from plasticizers and oils that will migrate out over time
  • Required for joints, seams, penetrations, and fastener heads
  • Applied with an airless sprayer (also available in brush or trowel grade)
  • Limited material warranty available for up to 10 years*
  • Guarantees available for up to 20 years*
  • Is available in 1-gallon, 5-gallon, and 55-gallon containers


Physical Properties

Roof Mate Spray Grade Flashing
Application Rate:
5 gallons/125 lineal ft. of seam (6” width)
Application Method:
Airless sprayer
Application Temp (air, surface):
42°F – 120°F
Drying Time (75°F, 50% RH):
Approximately 24 hours
Wet Mil Thickness:
105 wet mils
Dry Mil Thickness:
60 dry mils
Total Solids (by weight):
68% ± 1%
Total Solids (by volume):
56% ± 2%
Specific Gravity:
1.44 ± 0.1
Weight per Gallon:
12.0 ± 0.5 lbs
Viscosity (75°F):
140,000 ± 14,000 cps
Tensile Strength:
225 psi ± 10%

GAF
1 Campus Drive
Parsippany, NJ 07054
Tollfree: (800) 766-3411
Web site: http://www.gaf.com





Sweetsstakes