Foster™ - Foster® CP-210-5 CHIL-ABATE™ Sealer

DOWNLOADS

CHIL- ABATETM High Temperature Encapsulant/Penetrating Encapsulant/ Post Removal Sealer CHIL-ABATE CP-210 is a multi purpose silicate based low viscosity spray-applied wetting agent, and high temperature penetrating encapsulant and lock-down sealer designed for application onto all forms of asbestos


Category: asbestos abatement | coatings | finishes...

MasterFormat: Asbestos Remediation | Asbestos Abatement | High-Performance Coatings...


Related Products

Overview


Foster® CP-210-5 CHIL-ABATE™ Sealer



CHIL- ABATETM High Temperature Encapsulant/Penetrating Encapsulant/ Post Removal Sealer

CHIL-ABATE CP-210 is a multi purpose silicate based low viscosity spray-applied wetting agent, and high temperature penetrating encapsulant and lock-down sealer designed for application onto all forms of asbestos. It wets, encapsulates, and locks down asbestos fibers to the substrate.

CHIL-ABATE encapsulant/sealer performs multiple functions in negative air containment areas and glove bag removal processes. As a wetting agent and penetrating encapsulant, it wets, penetrates, and encapsulates asbestos containing materials (ACM) to permit safe, efficient removal and handling. As a high temperature, post-removal sealer, it securely adheres and seals residual asbestos fibers to the substrate. It identifies and designates those areas and objects, after post-removal, which are ready for refurbishing. It is also used in "misting" the containment area to reduce airborne asbestos fibers.

CHIL-ABATE encapsulant/sealer is used to encapsulate ACM prior to the application of a protective watertight mechanical abuse resistant bridging encapsulant, such as Chil-Bridge CP-211, when the encapsulated ACM is to remain in place temporarily or permanently.

CHIL-ABATE encapsulant/sealer is multi-functional. Only one product is needed to mist, wet, penetrate, remove and lock down ACM. It has little objectionable odor. Penetration into the ACM is both fast and deep which reduces material run-off and sets up the wetted ACM for faster removal.

CHIL-ABATE contains no asbestos, lead, mercury, or mercury compounds.

LIMITATIONS
Do not store over 100ºF (38ºC). Do not apply below 32ºF (0ºC) or to surfaces operating in excess of 130ºF (54ºC). Protect from freezing until dry.

TM TradeMark of H.B. Fuller Construction Products Inc.


COLOR:
Yellow Other colors available on special orders.

AVERAGE NON-VOLATILE (ASTM D-2369):
12% to 14% by weight

AVERAGE WEIGHT/U.S. GALLON (ASTM D 1475):
9.1 lbs. (1.09 kg/l)

SERVICE TEMPERATURE LIMITS (FSTM 70):
(Temperature to which dry encapsulant/sealer is subjected.) 0ºF to 1500ºF (-18ºC to 815ºC)

COVERAGE:
When used as a penetrating encapsulant, apply at coverage rate of 25 board ft. per U.S. gallon. 1/4" penetration = 100 sq.ft./gal. (2.45 sq.m/l) 1/2" penetration = 75 sq.ft./gal. (1.84 sq.m/l) 3/4" penetration = 50 sq.ft./gal. (1.23 sq.m/l) 1" penetration = 25 sq.ft./gal. (0.61 sq.m/l) To use as a post-removal sealer, apply at a coverage rate of 500 sq.ft./gal. (12.3 sq. m/l).

WET FLAMMABILITY (ASTM D 3278):
No flash to boiling 210ºF (98.9ºC)

SURFACE BURNING CHARACTERISTICS (ASTM E 84):
Flame Spread: 5.0
Smoke Developed: 0 Applied to 1/4" (6.4 mm) inorganic reinforced cement board at a coverage rate of one gallon per 100 sq. ft. (.41 l/m2). The flame spread may vary at different product thicknesses and/or when applied over surfaces other than inorganic reinforced cement board.




Visit us on the web at www.fosterproducts.com


See More


Specifications

GENERAL PURPOSE COATING SURFACE BURNING CHARACTERISTICS
Applied to ¼" Inorganic Reinforced Cement Board
Flame Spread: 5
Smoke Developed: 0
Rate per Coat (Sq.ft/gallon): 100
Number of Coats 1
Flash point of liquid coating (closed cup): no flash to boiling 282U
Sweets app for Revit – Learn More