Foster® 32-90™ ASBESTOS REMOVAL SURFACTANT
FOSTER ® ASBESTOS REMOVAL SURFACTANT
Foster ® Asbestos Removal Surfactant is a specially formulated, concentrated surfactant capable of penetrating and "wetting - out" all types of asbestos qui ckly and thoroughly. As it penetrates through the ACM, it absorbs onto the individual fibers, and through surface tension retards the release of fibers during the removal process. So effective, 32-90 wets-out even the Amphobiles, Amosite and Crocidolite, at our maximum dilution ratio.
Asbestos Removal Surfactant is capable of being diluted up to a maximum of 25 parts water to 1 part surfactant. Lower dilution ratios will give faster penetration rates.
Do not apply to surfaces below 32ºF (0ºC) or above 212ºF (100ºC).
Protect from freezing until dry.
Concentrate - Mild Diluted - None
AVERAGE WEIGHT / U.S. GALLON (ASTM D 1475):
8.3 lbs. (.99 kg/liter)
High Pressure or Low Pressure Airless Spray
Maximum recommended dilution ratio is 25:1, water to surfactant.
(Subject to the nature of the material being removed. Varies with the matrix, or substrates' absorbency, density, and thickness.) 3.5 gallons per 100 board feet theoretical to saturate to substrate. Actual required quantities to be determined by application to the intended ACM.
30.5 dynes/cm Diluted 25:1 water to surfactant
No flash to boiling, 210ºF (98.9ºC)
TM TradeMark of H.B. Fuller Construction Products Inc.
Visit us on the web at fosterproducts.com