Foster™ - Foster® 30-33 Vapor-Out™ Coating

DOWNLOADS

FOSTER FIRE RESISTIVE ANTI-ABRASION COATING WATER BASED FOSTER Fire Resistive Anti-Abrasion Coating is a high solids, water based fire resistive bore coating for the inner surfaces of cellular glass, rigid polyurethane, urea-formaldehyde, or polyisocyanurate foam insulation to reduce abrasion from v


Category: fiberboard insulation | plumbing insulation | polyurethane foam...

MasterFormat: Board Insulation | High-Performance Coatings | Fire-Retardant Coatings...


Related Products

Overview


Foster® 30-33 Vapor-Out™ Coating



FOSTER FIRE RESISTIVE ANTI-ABRASION COATING WATER BASED

FOSTER Fire Resistive Anti-Abrasion Coating is a high solids, water based fire resistive bore coating for the inner surfaces of cellular glass, rigid polyurethane, urea-formaldehyde, or polyisocyanurate foam insulation to reduce abrasion from vibration and temperature changes of piping or vessels. Its strong adhesive qualities through a wide temperature range permit its use on extremely low temperature and dual temperature equipment. It is light in color to facilitate application and eliminate holidays.

Fire Resistive Anti-Abrasion Coating contains no asbestos, lead, mercury, or mercury compounds.

Fire Resistive Anti-Abrasion Coating meets requirements for LEED IEQ 4.2 Low-Emitting Materials, Paints and Coatings. VOC: 15 g/l, less water and exempt solvents.

NUCLEAR GRADE Fire Resistive Anti-Abrasion Coating 30-16Q can be supplied to meet the stress corrosion and chemical analysis requirements of MIL-1-24244C or nuclear regulatory guide 1.36 on special order.

LIMITATIONS
Store and apply between 40ºF (4ºC) and 100ºF (38ºC). Protect from freezing until dry. Remove product from metal piping or other pieces of insulation while it is still wet. TM TradeMark of H.B. Fuller Construction Products Inc.

Visit us on the web at www.fosterproducts.com


COLOR:
Off White, wet and dry

APPLICATION:
Brush, Spray

AVERAGE WEIGHT/U.S. GALLON (ASTM D 1475):
13.2 lbs. (1.58 kg/l)

AVERAGE NON-VOLATILE (ASTM D 2369):
51% by volume (69% by weight)

COVERAGE RANGE (FSTM 72):
(Subject to type of surface being coated and method of application) 100-150 sq. ft. per gallon (2.5 to 3.7 m2 / l) 0.016 to .011 in. (0.41 to 0.28 mm) wet thickness

DRYING TIME 73ºF (23ºC) 50% RH (ASTM D 1640):
Set to Touch: 45 to 90 minutes
Dry Through: 2 to 3 hours Higher humidity or lower temperatures may retard drying.

SERVICE TEMPERATURE LIMITS (FSTM 70):
(Temperature at coated surface) -320ºF to 200ºF (-196ºC to 93ºC)

WET FLAMMABILITY (ASTM D 93):
Flash point over 212ºF (100ºC)

SURFACE BURNING CHARACTERISTICS (ASTM E-84):
Flame Spread:10
Smoke Developed:10
Tested at coverage rate of 70 sq. ft. per gal. (1.72 m2 /l).
Applied to 1/4 inch (6.4mm) inorganic reinforced cement board. The flame spread may vary at different product thicknesses and/or when applied over other surfaces.

FREEZE THAW STABILITY (FSTM 51):
Passes three cycles.


See More


Sweets app for Revit – Learn More