Finlandia Sauna Products, Inc. - Finlandia Precut Sauna Packages (FPC)

DOWNLOADS
All Finlandia material packages are made to order. Our precut packages are intended for use in a space that you have framed and insulated. Anyone with general carpentry experience can build a Sauna out of our FPC parts. We supply all the interior room parts and you nail or staple our 1"x 4"...

Category: precut saunas | saunas

MasterFormat: Special Purpose Rooms | Special Activity Rooms | Saunas



Finlandia Sauna Products, Inc.
14010-B S.W. 72nd Avenue
Portland, OR 97224
Tel: (800) 354-3342
Fax: (503) 684-1120

info@finlandiasauna.com

http://www.finlandiasauna.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview



Finlandia Precut Sauna Packages (FPC)

Finlandia Precut Sauna Packages (FPC)

All Finlandia material packages are made to order. Our precut packages are intended for use in a space that you have framed and insulated. Anyone with general carpentry experience can build a Sauna out of our FPC parts. We supply all the interior room parts and you nail or staple our 1"x 4" tongue and groove boards to your stud frame; our boards will run horizontally. We cut the material and build parts to fit your room; we don't just supply a pile of uncut lumber and unassembled pieces.

Finlandia's Standard Precut Packages include the following:

  • All-clear 1"x 4" (11/16" thick) Western Red Cedar for your walls and ceiling
  • Trim and base boards in matching wood
  • Assembled benches made of 2"x 2" tops with 1/2" spacing and 2"x 4" facing
  • Prehung glass door with solid wood rails and V.G. Douglas Fir lamination, ¾" thick threshold, and interior casing
  • Assembled headrest(s) for upper benches
  • Finlandia Sauna heater model FLB with built-in controls (exterior wall controls optional) or FLC heater for larger size rooms
  • Stones-50 to 100# (depending on heater size)
  • Wooden heater guard
  • Super Dek, interlocking flooring squares for walking area (Super Dek plastic mat overlays on your existing floor)
  • P5511 Wall light, V10 Metal Vents (V5 Cedar Vents available), Nails, DVD Instructions, and Sauna Accessories including 102N Wooden Bucket with plastic liner, 106/40 Dipper, 0301K Thermometer, 079 Headrest for each upper bench, and Bathing Sign
  • Type C Building Foil (Vapor Barrier/Heat Reflector)


Finlandia Precut Sauna Packages (FPC)

Preparation for FPC Sauna Package

  • Frame room to desired size using wood or metal studs. Our T&G boards are nailed directly to the wood frame. Metal studs require drywall and 1x2 (3/4" thick) wood nailing strips.
  • Lower ceiling to 7 0" from finished floor.
  • Frame door rough opening to 26" x 82" for standard 2' 0" door.
  • Frame in an upper and a lower vent box with rough opening of 4" x 10".
  • Install rough electrical for Sauna heater, wall light, and wall control (if applicable). Single gang rough in for wall light should be 78" from the floor or 6” below the ceiling.
  • Insulate all walls and ceiling with R-13 fiberglass batt insulation.
  • Install waterproof floor of tile, vinyl, or cement. A drain in the Sauna is optional for residential but is recommended for commercial use. FPC Package does not include a solid surfaced floor.
  • Finish the exterior Sauna walls with drywall or some type of paneling. Finlandia does not provide exterior paneling for FPC packages unless it is requested.


Finlandia Precut Sauna Packages (FPC)

We cut all packages to your exact inside stud to stud dimensions in your choice of wood. Our standard wood is clear Western Red Cedar. Clear Redwood, clear Alaskan Yellow Cedar, and clear Western Hemlock are optional woods. We can cut to virtually any custom size.


Finlandia Precut Sauna Packages (FPC)


Finlandia Sauna Products, Inc.
14010-B S.W. 72nd Avenue
Portland, OR 97224
Tel: (503) 684-8289
Fax: (503) 684-1120
Tollfree: (800) 354-3342
E-mail: info@finlandiasauna.com
Web site: http://www.finlandiasauna.com





Sweets app for Revit – Learn More