Fabcel Nitrile Pad for Vibration Isolation
Fabcel vibration isolation pad is manufactured using the same nitrile compound developed in 1962. The properties of the Fabcel pad are designed to provide low frequency vibration isolation and reduction of impact shock.
Fabcel nitrile pad has been used for over 40 years for mounting machinery and sensitive equipment where absorption of impact shock or isolation of transmitted vibration is desired. Fabcel pads may be bonded together ("layered") to achieve the desired isolation efficiency for any application.
Fabcel material is available as isolation washers and OEM parts.
Fabcel pad can withstand loads up to 300 psi.
Fabcel pad can have a vertical natural frequency as low as 5.0 Hz and a horizontal natural frequency as low as 3.0 Hz.
Fabcel pad has a high energy storage rate per unit volume which makes it ideal for certain shock isolation applications.
The unique "cell" (waffle) pattern on the Fabcel vibration isolation pad is specifically designed to maintain the proper shape factor for the pads when under load. This feature allows Fabcel pads to support more load than other rubber pads of the same size and thickness.
Fabcel pads have a damping rate of 6% of critical.
Fabcel pad is made from a nitrile compound and is therefore impervious to most oils and cutting fluids and is resistant to the effects of steam, water, mildew and brine. The effective temperature range is -20°F to 150°F.
|Fabcel Pads||25||50 and 200||100 and 300|
|Shore "A" Durometer Hardness||25 ± 5||50 ± 5||65 ± 5|
|Tensile Strength||2,000 psi||2,000 psi|
Fabcel Pads are rated for loads as follows:
|Fabcel 25||25 psi||5/16"|
|Fabcel 50||50 psi||5/16"|
|Fabcel 100||100 psi||5/16"|
|Fabcel 200||200 psi||1/2"|
|Fabcel 300||300 psi||1/2"|
Fabreeka International, Inc.
PO Box 210
1023 Turnpike Street
Stoughton, MA 02072
Tel: (781) 341-3655
Fax: (781) 341-3983
Tollfree: (800) 322-7352
Web site: http://www.fabreeka.com