System F3 Access Panel
The access panel consists of a welded aluminum frame and is available with 1/2" (12.7 mm) or 5/8" (15.9 mm) inlayed drywall and two latches.
Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process.
For sizes 12 x 12 (305 x 305 mm) and up the access panels are equipped with a safety system to prevent accidental opening. This safety system must be reattached if the hatch is removed.
The reveal of 1/8 of an inch (3 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side.
This access panel is designed for tiling applications.
The access panel is aligned to the grid dimension of the tiles.
Information on the dimensions of the tiles and joint gaps is required from which dimensions A and B can be ascertained.
Dimensions D and E remain constant. Dimension C corresponds to the respective drywall thicknesses.
- For tiling the door leaf: The aluminium profile is flush with the board. The tiles are placed upon the profile.
- For tiling into the frame: The aluminium profile is higher than the board. The tiles are placed into the frame.
- easier assembly for the installer
- clean finish border
These are custom sizes, manufactured exactly according to customer specifications.
FF Systems, Inc.
4841 Waycross Road
Fort Myers, FL 33905
Tel: (239) 288-4255
Fax: (239) 288-4251
Web site: http://www.ffsystemsinc.com
545 Trillium Drive, Unit 2
Kitchener, ON N2R 1J4
Tel: (519) 896-0888