Extrutech Plastics, Inc. -P624 & P824, Extrutech, Stay-In-Place Form

DOWNLOADS

Extrutech FORM System is a "stay-in-place" concrete form for poured structural walls. Is ideal for high moisture areas were sanitation is critical. This durable, long lasting system is designed for ease of construction, sanitation and maintenance.


Category: cast-in-place forms | concrete forms | forms...

MasterFormat: Concrete Forming and Accessories | Concrete Forming | Architectural Cast-in Place Concrete Forming



Extrutech Plastics, Inc.
5902 West Custer Street
Manitowoc, WI 54220
Tel: (888) 818-0118
Fax: (920) 684-4344

Info@epiplastics.com

http://www.epiplastics.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


P624 & P824, Extrutech, Stay-In-Place Form

Extrutech FORM System is a "stay-in-place" concrete form for poured structural walls. Is ideal for high moisture areas were sanitation is critical. This durable, long lasting system is designed for ease of construction, sanitation and maintenance. Is made up of snap together, two foot wide panels, with cut to the inch lengths, that makes for quick installation. This concrete wall FORM system offers a non-porous, prefinished, bright white surface on both sides, reducing finishing and installation time while providing a easy to clean sanitary solid structural wall.

Extrutech Stay-in-Place Concrete FORM Wall System
Extrutech Plastics, Inc.'s
FORM is a "stay in place" concrete form for 6" and 8" poured concrete walls. Each FORM panel is 2' feet wide, 6" or 8" thick, cut to the inch lengths up to 20' long or pre-cut to project specifications and shipped as a kit to your jobsite.

Extrutech Plastics, Inc. brings a bright new face to concrete form construction by combining standard concrete form methods with the easy-to-clean, sanitary surface that Extrutech panels have always provided. This versatile, builder-friendly system features a two-foot wide, six inch thick precut panel that snaps together and locks in place using a double-spline E-Locking System. This creates a structural wall system that is a time-saver for both contractor and client, resulting in a bright white, sanitary, easy-to-clean finished wall.

Extrutech FORM System features a double-spline, male/female interlocking joints and strong honeycomb interior walls designed to provide maximum panel stability.

The Extrutech FORM panels lock together with a overlapping joint and use a double spline E-Locking System that allows the panel to be joint together side by side, without having to lift one panel over the other or slide one panel down the edge of another.
The Extrutech FORM System is listed under the following patents:
U.S. PATENT 8,677,713 CANADIAN PATENT 2833,490 MEXICAN PATENT 344648

Advantages:

  • Quick installation

  • Never needs paint

  • Fewer Seams - 2' wide panels

  • Custom cut panel kits to 20'

  • Snap together double spline, E-Locking System

  • Standard rebar reinforcing methods apply

  • Water and corrosion-proof

  • Cleans easily - low maintenance

  • Panels will not rust, rot, or flake

  • Resists mold, mildew, bacteria growth

  • Brightens the interior of any building

  • Available in a bright white, high gloss surface

  • Low maintenance, easy-to-clean, with water/mild cleaner

  • Protective film on both sides keeps panels clean during construction

Recommended Use:

For any area that requires easy-to-clean concrete structural walls such as:

  • Dairy Barns

  • Cheese Plants

  • Bottling Plants

  • Milking Parlors

  • Food Processing

  • Cold Storage

  • Car Washes

  • Clean Rooms

  • Laboratories

Panel Options

Extrutech 8" Inch Thick FORM Panel - Gives you the extra thickness for larger jobs

This concrete FORM panel is a large, tough, quick setup panel, with snap together edges that form a strong, straight, flat, pre-finished wall, greatly reducing your setup and finishing time. Each 8" thick by 24" inches wide panel can be cut to the inch to lengths up to 20' long or pre-cut to project specifications for windows and doors; and shipped as a kit to your jobsite.

The Two Foot Wide, 8" Thick FORM Panel can also be insulated to meet your needs

Extrutech 8" thick Form panel can also be insulated with 2" of insulated foam for R-14. Brick and stone masonry may be added to exterior, to enhance the buildings appearance.

Exterior Options Available

EXTRUTECH EXTERIOR THIN BRICK OPTIONS

Applied directory to the surface of the panel, we have a large number of: patterns, sizes, and colors available in individual panel sizes to cover large areas quickly.

Extrutech FORM Panel Locking

The Extrutech FORM panels lock together with a overlapping joint and use a double spline E-Locking System that allows the panel to be joint together side by side, without having to lift one panel over the other or slide one panel down the edge of another. Extrutech FORM Corner Detail locked together with the double spline E-Locking System.
Note: Two spline inserts are required at each joint.


See More


Specifications

Specifications
Material
PVC
Thickness
6" Inch
Width
24 Inch
Standards
ASTM D3273
ASTM D3274
Panel Design
Flat Glossy
Interlocking
Warranty
10 y
Weight
7.1 lb/ft
Color
Beige
White
Available Lengths
4' Ft to 20 Ft. ft
Cut to the Inch ft
Sweetsstakes