P0241 Base, Two Part H-Bar Trim
Extrutech Plastics Two Part H-Bar Base, Item # P0241 for use as an expansion joint trim between panels -16' foot on center, as panel end connector trim or to allow for removal and reversing of panels. This item is made of an exterior grade, hard, dense, rigid polymer, with a smooth surface of a 3" face area and 1 1/8" coverage for each side. Is 9/16" x 3" wide, to cap 1/2" thick wall panels. Cut with standard power saw using a fine toothed blade. Fasten with truss head screws 24" OC and construction adhesive per installation instructions or industry standard. Non-painted in white, available at 2' increments from 8' - 16' foot lengths, with a weight of 0.15 lbs per foot. Need to use with Item # P0240 Two Part H-Bar Cap.
Extrutech Plastics provides a number of high quality panel trims that give your project a clean finished look. To view these trim options click on the photo or blue high-lighted text. Trims are available with a non-painted finish in 8', 10'.12', 14', 16' foot lengths, color matched to requested panels, Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim or truss head screws and construction adhesive per installation instructions or industry standard.