P022618 2 1/4 Inch Slip-On Corner
Extrutech 2 1/4" Slip-on Corner, Item # P022618, is used as one of two corner options of the Extrutech Partition Wall System. This corner trim allows the corner to be slipped over the sides of standing panels where clearances are tight. Is of an exterior grade, hard, dense, rigid pvc, with a smooth surface, and has a 0.65" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws and construction adhesive per installation instructions or industry standard. This product is non-painted, available in white, at 9' and 18' foot lengths, with a weight of 0.4 lbs per foot.
The Extrutech P224 Partition Wall Panel is a rigid 2 1/4" thick by 24" wide, smooth wall panel; with a bright white, glossy surface on both sides that provides that fresh, clean appearance. This waterproof panel, will never rust, rot, corrode or fade. The panel is easy to clean and ideal for corrosive or high moisture areas where daily sanitation is critical, and can also be used for general moisture and dust control, or used to limit area access reducing cross contamination.