Extrutech Plastics, Inc. -P022618, 2 1/4 Inch Slip-On Corner

DOWNLOADS

Extrutech 2 1/4" Slip-on Corner, Item # P022616, is used as one of two corner options of the Extrutech Partition Wall System. This corner trim allows the corner to be slipped over the sides of standing panels where clearances are tight.


Category: cleanroom partition walls | partition wall components | partition wall panels...

MasterFormat: Interior Specialties | Partitions



Extrutech Plastics, Inc.
5902 West Custer Street
Manitowoc, WI 54220
Tel: (888) 818-0118
Fax: (920) 684-4344

Info@epiplastics.com

http://www.epiplastics.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


P022618, 2 1/4 Inch Slip-On Corner

Extrutech 2 1/4" Slip-on Corner, Item # P022616, is used as one of two corner options of the Extrutech Partition Wall System. This corner trim allows the corner to be slipped over the sides of standing panels where clearances are tight. Is of an exterior grade, hard, dense, rigid pvc, with a smooth surface, and has a 0.65" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws and construction adhesive per installation instructions or industry standard. This product is non-painted, available in white, at 8' and 16' foot lengths, with a weight of 0.4 lbs per foot.

Additional Information

The P224 Partition Wall Panel allows numerous design options. A wall thickness of 2 1/4" which allows for an insulation option that provides a (R-10). Cut to the inch panel lengths or based on your requirements, with door and window cut-out options. This user friendly panel also allows for easy field cuts if needed and its tongue and groove design makes for quick installation.


See More


Specifications

Specifications
Width
2.25 Inch
Panel Design
Slip-On Corner
Available Lengths
16 ft
8 ft
Cut to the Inch
Color
White
Weight
0.40 lb/ft
Thickness
0.065 Inch