Extrutech Plastics, Inc. -EPI0100 Rigid U-Channel

DOWNLOADS

Extrutech 1 3/4" Rigid U-Channel, Item # EPI0100, is used as a base channel, cap channel or perimeter trim of the standing EPI9000 wall panel, for the Extrutech demountable partition wall system.


Category: PVC partition wall panels | demountable panels | sanitary partition wall panels...

MasterFormat: Interior Specialties | Partitions | Demountable Partitions



Extrutech Plastics, Inc.
5902 West Custer Street
Manitowoc, WI 54220
Tel: (888) 818-0118
Fax: (920) 684-4344

Info@epiplastics.com

http://www.epiplastics.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


EPI0100 Rigid U-Channel

Extrutech 1 3/4" Rigid U-Channel, Item # EPI0100, is used as a base channel, cap channel or perimeter trim of the standing EPI9000 wall panel, for the Extrutech demountable partition wall system. Is of an exterior grade, hard, dense, rigged pvc, with a smooth surface, with 070" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws per installation instructions or industry standard. This product is non-painted in white, available at 2' increments from 4' - 16' foot lengths, with a weight of 0.25 lbs per foot.

Additional Information

EPI’s 36" x 1 3/4" EPI9000 multi-chamber interlocking wall panel is designed for use in all environments where a durable, moisture proof partition wall or enclosure is required. Just like our attractive wall and ceiling panels, we custom extrude these panels to your specifications - up to 20' in length. No wasted materials and they install quickly and easily with our accompanying trims. The panel is divided into thirty-six 1" x 1 3/4" chambers. Each chamber runs the length of the panel with an external wall thickness of 0.070” and an internal wall thickness of 0.030". In addition, the panels can be insulated and or reinforced for additional structure support. The EPI9000 panels are not fire rated.

  • Durable, strong 36" x 1 3/4" multi-chamber, interlocking wall panels made of rigid, virgin polymers

  • Easy assembly, all parts pre-cut

  • Finish surface on both sides of the panel, never needs painting.

  • Moisture and rot proof, mildew resistant

  • Low maintenance, easy to clean, just spray off with water/cleaner

  • Termite resistant

  • Will not rust

  • Brightens the interior of any building

  • Light-weight, low shipping cost

  • Custom sizes and insulated panels available

  • Available in a bright White color


See More


Specifications

Specifications
Material
Rigid Virgin Polymer
Thickness
0.070 Inch
Width
1.75 Inch
Weight
0.25 lb/ft
Color
White
Available Lengths
10 ft
12 ft
14 ft
16 ft
4 ft
6 ft
8 ft
Cut to the Inch
Features
Durable
Impact Resistant
Lightweight
Low Maintenance
Mildew Resistant
Moisture Proof
Never Needs Paint
Will Not Rot
Will Not Rust
Will Not Warp
Warranty
10 y
Standards
ASTM D3273
ASTM D3274
Facilities Served
Agriculture Facilities
Beverage Plants
Car Washes
Chemical Plants
Dairies
Food Processing
Installation Overview
Attach Channel to Floor
Place Panel into U-Channel
Connect Wall Panels with H-Channel
Sweetsstakes