13RS075048 / 38R50ZR9N 3/4" & 1" OD Spacers

Extrutech can provide solid nylon spacers to aid with installation of hardware or equipment to your walls. Spacers come in two sizes, 3/4" inch(item# 13RS075048) and 1" inch OD (Item# 38R50ZR9N). They aid in providing a solid spacer and transfer the weight of the hardware to the structure. The spacers are donut in shape and allow for bolting thru the panels, providing a solid surface that the hardware can be secured to.

Support Bolt or Fastener Size will determine size of spacer needed. For 3/16" bolts and smaller fasteners use the 3/4" OD Spacer (13RS075048), for larger hardware that need a 1/4"- 3/8" bolt use the 1" dia spacer (38R50ZR9N). Next spot the centers of your hole locations, and use a Forstner Bit 1" or 3/4" depending on size needed and drill required holes in panels as needed. Fit spacers in and use the spacer centers to spot your drill locations for the bolt holes into the structure.

To give your project that sharp professional finished look, Extrutech Plastics recommends or can provide products that will aid with installation of panels, trims, and mounting hardware. Provide adhesives and joint fillers for around edges and behind panels or trims. Provide fasteners for securing panels & trims; and cleaners to keep your panels looking good for years.

See More

See Less