Elite Fence Products, Inc. - ZipTrack Cantilever Gates

PRODUCT PRESENTATION: Elite manufactures ZipTrack ™ Aluminum Cantilever Gates. The cantilever gates are offered in a variety of styles and colors to complement your ornamental aluminum fence. The ZipTrack Aluminum Cantilever Gate is also available in frame only so you can add your own chainlink...


MasterFormat: Site Improvements | Fences and Gates



Elite Fence Products, Inc.
50925 Richard W. Blvd
Chesterfield, MI 48051
Tel: (800) 783-1331
Fax: (586) 468-4884

fence-info@elitefence.com

http://www.elitefence.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview



ZipTrack Cantilever Gates

ZipTrack Cantilever Gates

PRODUCT PRESENTATION:

Elite manufactures ZipTrack Aluminum Cantilever Gates. The cantilever gates are offered in a variety of styles and colors to complement your ornamental aluminum fence. The ZipTrack Aluminum Cantilever Gate is also available in frame only so you can add your own chainlink or wood for maximum security.

SPECIFICATIONS:

The frames and tracks are fabricated from extrusions (6061-T6). The upper track weighs 5.816# per foot and lower 3.322# per foot. The upper and lower frames shall be welded and/or bolted to 2" x 2" tubes at 1.12# per foot vertical framing. Each section for the tail shall be x-braced with two (2) 1" x 2" tubes at .824# per foot. Each front section shall have one (1) 1" x 2" tube at .824# per foot diagonal brace. Gates made for chainlink may be shipped with the wire in place or the wire can be installed at the job site. The fabric shall be held in place by tension bars, tension bands and bolts. Barbwire shall be held in place by brace bands and bolts.

TRUCK ASSEMBLIES:

Two (2) swivel type assemblies are made of galvanized steel. Each having two (2) axles press fitted to the main body. The axles are then press fitted with four (4) permanently lubricated sealed ball bearing wheels mounted vertically for rolling the gate. Two (2) top mounted horizontal rolling wheels are used for alignment.


ZipTrack Cantilever Gates

LOWER GUIDES:

Two permanently lubricated sealed ball bearing wheels are mounted to the gate post and should be vertically centered in the lower track. All brackets and gate latches shall be galvanized after fabrication. The enclosed lower guide assembly offers greater safety utilizing guarded pinch points. ZipTrack Aluminum Cantilever Gates and Truck Assembly are covered under a Five Year Limited Warranty.


ZipTrack Cantilever Gates

SPECIFICATIONS

ELITE ZIPTRACK ALUMINUM CANTILEVER SLIDE GATE

As manufactured by Elite Fence Products shall conform to the following specifications: FS RR-191/2D Type III & IV and ASTM F 1184-88.

FULLY FABRICATED GATE

The gate shall be fabricated in Elite's Plant. The frames and tracks are fabricated from aluminum extrusions (6061-T6). The upper track weighs 5.816# per foot and the lower 3.322# per foot. The upper and lower frames shall be welded and/or bolted to 2" x 2" tubes at 1.12# per foot vertical framing. Each section for the tail shall be x-braced with two (2) 1" x 2" tubes at .824# per foot. Each front section shall have one (1) 1" x 2" tube at .824# per foot diagonal brace.

Gates made for chainlink may be shipped with the wire in place or the wire can be installed at the job site.

The fabric shall be held in place by tension bars, tension bands and bolts. Barbwire shall be held in place by tension bands and bolts.

MODULAR GATE

The gate shall be fabricated in modular sections. The modular sections shall slide into the upper and lower tracks. The modular frames are fabricated from aluminum extrusions (6061-T6). The upper and lower C-Channels weigh.595# per foot, each. The end post of the module is 1" x 2" tube at .824# per foot or 2" x 2" tube at 1.12# per foot. The upper track weighs 5.816# per foot and the lower 3.322# per foot.

Each modular section for the tail shall be x-braced with two (2) 1" x 2" tubes at .824# per foot. Each front section shall have one (1) diagonal 1" x 2" tube brace.

The modular sections may be shipped with the wire in place or the wire can be installed after the modular sections have been installed into the upper and lower tracks making one unit. The modular sections shall be held in place by bolting. All holes for assembly will be predrilled.

The fabric shall be held in place by tension bars, tension bands and bolts. Barbwire shall be held in place by tension bands and bolts.

ORNAMENTAL PICKET TYPE GATES

Not available in modular sections.

The upper & lower tracks will have holes punched to accepted 1" square x .062 picket, the pickets shall be attached by using stainless steel screws.

KNOCKED-DOWN GATE

A knocked-down gate can be supplied ready-to-assemble. All hardware is furnished and all necessary holes are pre-drilled.

TRUCK ASSEMBLY

Two (2) swivel type assemblies are made of galvanized steel. Each having two (2) axles press fitted to the main body. The axles are then press fitted with four (4) permanently lubricated sealed ball bearing wheels mounted vertically for rolling the gate. Two (2) top mounted horizontal rolling wheels are used for alignment.

LOWER GUIDES

Two permanently lubricated sealed ball bearing wheels are mounted to the gate post and should be vertically centered in the lower track.

All brackets and gate latches shall be galvanized after fabrication.

ZipTrack Aluminum Cantilever Gates and truck Assembly are covered under a Five Year Limited Warranty.

Elite Fence Products, Inc.
50925 Richard W. Blvd
Chesterfield, MI 48051
Tel: (586) 468-4448
Fax: (586) 468-4884
Tollfree: (800) 783-1331
E-mail: fence-info@elitefence.com
Web site: http://www.elitefence.com





Sweets app for Revit – Learn More