Dunbarton Corporation - Slimfold Bifold and Overlay Mirrored Doors

GENERAL INFORMATION SERIES 2700 ST AND 2750 ST Steel Bifold Mirror Door with Chrome Mylar Edging Provide Model 2700 bifold mirror wardrobe doors manufactured by Slimfold Corporation, Dothan, AL in the dimensions shown on the drawings and with the following attributes: ARRANGEMENT a. Bifold...


Category: bi-folding closet doors | bifolding closet doors | closet doors...

MasterFormat: Folding Doors | Panel Folding Doors | Closet Doors...



Dunbarton Corporation
1101 Technology Drive
Dothan, AL 36303
Tel: (800) 633-7553
Fax: (334) 793-7022

sales@dunbarton.com

http://www.dunbarton.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview



Slimfold Bifold and Overlay Mirrored Doors

Slimfold Bifold and Overlay Mirrored Doors

GENERAL INFORMATION SERIES 2700 ST AND 2750 ST
Steel Bifold Mirror Door with Chrome Mylar Edging

Provide Model 2700 bifold mirror wardrobe doors manufactured by Slimfold Corporation, Dothan, AL in the dimensions shown on the drawings and with the following attributes:

ARRANGEMENT

a. Bifold mirror doors shall consist of mylar-framed mirror panels laminated to a steel panel. Panel will be 24 gauge cold rolled steel or zinc-iron alloy (G60) galvanized. Series 2750 available with Bright Gold mylar edging.

b. Top and bottom tracks are (G60) galvanized steel or optional .050 wall aluminum on 2700 series. 2750 Series tracks are aluminum. 2725 and 2775 Series bottom track is 3" Freedom Track.

c. Weight bearing pivot rods are adjustable screw-type, and securely held in place by nylon rod clamps assemblies.

d. Guide rods and upper pivot rods are spring loaded for easy self-alignment, and securely held in position by self-retaining nylon sleeves combined as exclusive Slimfold Patented hardware system.

e. Door panels shall be reinforced with 4" (10cm) wide stiffeners welded to backs and flanges of panels, hinged in pairs with a minimum of 10" (25cm) of piano-type hinges.

PANELS

a. 3mm float plate glass mirror, safety backed to conform with Uniform Building Code Standard 24-2, Part II. Safety mirror 400 lb. ft. Impact test ANSI Z-97.1 1984 boil and impact test.

b. Mirror shall be securely mounted with dual faced cushion adhesive tape. A steel channel shall protect the bottom edge of the mirror.

Heavy-Duty Steel Bifold Door with Mirror Laminate

  • Heavy duty, long life bypass
  • Mirror laminated on 24 gage steel panel – Exclusive Design!
  • Easily installed—only a screwdriver required!
  • Patented Slimfold® hat and hardware system installed
    • Smooth and quiet operation
    • Breaks over center allowing maximum opening
    • Spring loaded guide rods for self-alignment
  • 3.0 mm safety backed mirror
  • Panel Colors:Bright White, Ivory and Black
  • Track:Prefinished Steel Track; option is polished chrome
  • Mirror Edging:Polished Chrome mylar mirror edging
  • Handle:Polished Chrome handle
  • Series 2750 STAvailable with Polished Brass Mirror Edging/Handle and Polished Brass Aluminum Top and Bottom Track


Slimfold Bifold and Overlay Mirrored Doors

GENERAL INFORMATION
SERIES 4400 ST

Steel Framed Bifold Mirror Door

Provide Model 4400 bifold mirror wardrobe doors manufactured by Slimfold Corporation, Dothan, AL in the dimensions shown on the drawings and with the following attributes:

ARRANGEMENT

a. Bifold mirror wardrobe doors shall consist of framed mirror panels joined at the top and bottom by concealed hinges with stops that prevent over closing of the door.

b. Spring-loaded guides with 11/16" (17mm) travel shall be installed at the top and bottom corners of the lead (guided) door panel. The spring-loaded top pivot in the pivot panel shall engage a horizontally adjustable pivot bracket retained in the top track. The guides shall engage wheels that are free to slide or rotate and are retained in the top and bottom tracks. The wrench adjustable bottom pivot shall be installed in the bottom corner of the pivot panel and engage a horizontally adjustable pivot bracket in the bottom track.

c. The pivots and guides shall be installed in corner connector holes by tapping on their projecting steel pins. The pivot and guide housings shall be interchangeable so a pair of doors can install either to a right or left jamb.

d. The top and bottom tracks shall be of same height and interchangeable by containing identical hardware. A spring snugger is installed in both the top and bottom tracks to help keep the doors in place while in the closed position.

e. The concealed hinges shall be zinc plated and be assembled with two plastic bearing washers to prevent binding and promote long wear life.

FRAME

a. Each door shall consist of 2 prefinished roll formed steel framed mirror panels. Stiles and rails shall be joined at each corner by a corner block. Each corner block shall have a cavity to accept a pivot or guide.

b. A matching aluminum mechanically fastened pull shall be provided.

PANELS

3mm float plate glass mirror, safety backed to conform with Uniform Building Code Standard 24-2, Part II. Safety mirror 400 lb. ft. Impact test ANSI Z-97.1 1984 boil and impact test.

FINISHES

Bright White, Vanilla, Architectural Brown, Black, Arctic Silver, Satin Gold, Bright Gold

Steel Framed Bifold Mirror Door

  • Bifold design provides full access to closet opening
  • 1/4" frame around mirrors
  • Interchangeable dual-height tracks
  • Bearing hinges for smooth, non-binding door operation
  • Matching aluminum pulls
  • 3.0mm safety backed mirror
  • Track:Top and bottom track prefinished to match door

Stiles/Rails:Bright White, Vanilla, Architectural Brown, Black, Arctic Silver, Satin Gold, Bright Gold


Slimfold Bifold and Overlay Mirrored Doors

GENERAL INFORMATION
SERIES 4900 ST

Steel Frameless Bifold Mirror Door

Provide Model 4900 bifold mirror wardrobe doors manufactured by Slimfold Corporation, Dothan, AL in the dimensions shown on the drawings and with the following attributes:

ARRANGEMENT

a. Bifold mirror wardrobe doors shall consist of mirror panels joined at the top and bottom by concealed hinges with stops that prevent over closing of door.

b. Spring-loaded guides with 11/16" (17mm) travel shall be installed at the top and bottom corners of the lead (guided) door panel. The spring-loaded top pivot in the pivot panel shall engage a horizontally adjustable pivot bracket retained in the top track. The guides shall engage wheels that are free to slide or rotate and are retained in the top and bottom tracks. The wrench adjustable bottom pivot shall be installed in the bottom corner of the pivot panel and engage a horizontally adjustable pivot bracket in the bottom track.

c. The pivots and guides shall be installed in corner connector holes by tapping on their projecting steel pins. The pivot and guide housings shall be interchangeable so a pair of doors can install either to a right or left jamb.

d. The top and bottom tracks shall be of same height and interchangeable by containing identical hardware. A spring snugger is installed in both the top and bottom tracks to help keep the doors in place while in the closed position.

e. The concealed hinges shall be zinc plated and be assembled with two plastic bearing washers to prevent binding and promote long wear life.

FRAME

a. Each door shall consist of 2 prefinished roll formed steel framed mirror panels. Stiles and rails shall be joined at each corner by a corner block. Each corner block shall have a cavity to accept a pivot or guide.

b. The stiles shall be bonded to the back of the mirror and shall not cover the long sides of the mirror.

c. A bright anodized aluminum mechanically fastened pull shall be provided.

PANELS

a. 3mm float plate glass mirror, safety backed to conform with Uniform Building Code Standard 24-2, Part II. Safety mirror 400 lb. ft. Impact test ANSI Z-97.1 1984 boil and impact test.

b. Polished edges on two long sides.

FINISHES

Bright White, Vanilla, Architectural Brown, Black, Arctic Silver, Satin Gold, Bright Gold


Slimfold Bifold and Overlay Mirrored Doors

GENERAL INFORMATION
SERIES 5003 AL Framed Bifold Door

Provide Model 5003 bifold mirror wardrobe doors manufactured by Slimfold Corporation, Dothan, AL in the dimensions shown on the drawings and with the following attributes:

ARRANGEMENT

a. The Slimfold 5002 Series bifold has a full offset capability when opened which allows about 95% closet storage access. Consists of a pair of aluminum framed door panels joined at the top and bottom by hinges that prevent overclosing of the door.

b. The framed stiles (vertical member) and rails (horizontal member) are pressed on. The rails shall provide a mechanical fitting at the top and bottom.

c. Each corner of a panel has a plastic corner connector mechanically fastened to the stiles and rails. The universal corner connectors have cavities to accept top and bottom pivots and guides.

d. Spring loaded guides are installed at the top corner and the bottom corners of the lead door panel. The top guide on the jamb panel serves as a pivot and engages a horizontally adjustable pivot bracket retained in the top track. The slide guides in the lead panel engage the top and bottom tracks. Snuggers which are retained in the top and bottom tracks snug the door when its fully closed. The lower pivot is vertically adjustable over a range of 7/8" (22mm) by means of a nut which turns on a threaded bolt in the body of the pivot and engages a horizontally adjustable pivot bracket retained in the top track.

e. The top and bottom track shall be of pre-finished aluminum. Both tracks shall match the stile and rail. A metal pull attached to the stile of the jamb door is used to operate the door. The pull finish shall match the stile, rail and tracks. The stile, rail, top track and bottom track shall have a baked enamel paint finish (bright brass, satin brass, bright chrome or satin chrome). The pull shall have either a baked enamel finish or a bright anodized finish.

f. A metal pull attached to the stile of the jamb door is used to operate the door. The pull finish shall match the stile, rail and tracks.

PANELS

a. 3mm float plate glass mirror, safety backed to conform with Uniform Building Code Standard 24-2, Part II. Safety mirror 400 lb. ft. Impact test ANSI Z-97.1 1984 boil and impact test.

FINISHES

The stile, rail, top track and bottom track shall have a baked enamel paint finish (bright brass, satin brass, bright chrome or satin chrome). The pull shall have either a baked enamel finish or a bright anodized finish.


Slimfold Bifold and Overlay Mirrored Doors

GENERAL INFORMATION
SERIES 5002 AL Frameless Bifold Door

Provide Model 5002 bifold mirror wardrobe doors manufactured by Slimfold Corporation, Dothan, AL in the dimensions shown on the drawings and with the following attributes:

ARRANGEMENT

a. The Slimfold 5002 Series bifold has a full offset capability when opened which allows about 95% closet storage access. Consists of a pair of aluminum frameless door panels joined at the top and bottom by hinges that prevent overclosing of the door.

b. The aluminum frameless stiles (vertical member) are bonded to the back of the penciled or beveled mirror edge. A protective edge is an integral part of the stile that protects the edge of the insert without taking away from the aesthetics of the frameless look. The rails (horizontal member) shall provide a mechanical fitting at the top and bottom.

c. Each corner of a panel has a plastic corner connector mechanically fastened to the stiles and rails. The universal corner connectors have cavities to accept top and bottom pivots and guides.

d. Spring loaded guides are installed at the top corner and the bottom corners of the lead door panel. The top guide on the jamb panel serves as a pivot and engages a horizontally adjustable pivot bracket retained in the top track. The slide guides in the lead panel engage the top and bottom tracks. Snuggers which are retained in the top and bottom tracks snug the door when its fully closed. The lower pivot is vertically adjustable over a range of 7/8" (22mm) by means of a nut which turns on a threaded bolt in the body of the pivot and engages a horizontally adjustable pivot bracket retained in the top track.

e. The top and bottom track shall be of pre-finished aluminum. Both tracks shall match the stile and rail. A metal pull attached to the stile of the jamb door is used to operate the door. The pull finish shall match the stile, rail and tracks.

f. A metal pull attached to the stile of the jamb door is used to operate the door. The pull finish shall match the stile, rail and tracks.

PANELS

a. 3mm float plate glass mirror, safety backed to conform with Uniform Building Code Standard 24-2, Part II. Safety mirror 400 lb. ft. Impact test ANSI Z-97.1 1984 boil and impact test.

FINISHES

The stile, rail, top track and bottom track shall have a baked enamel paint finish (bright brass, satin brass, bright chrome or satin chrome). The pull shall have either a baked enamel finish or a bright anodized finish.


Slimfold Bifold and Overlay Mirrored Doors

GENERAL INFORMATION
SERIES 4100 AL Framed Overlay Door

Provide Model 4100 overlay mirror wardrobe doors manufactured by Slimfold Corporation, Dothan, AL in the dimensions shown on the drawings and with the following attributes:

ARRANGEMENT

a. Overlay mirror door shall consist of a single mirror panel framed with anodized aluminum stiles and rails secured together with screws.

b. Overlay mirror door shall be supported by 12 gage pivot brackets at both the top and bottom and shall be prefinished to match the framing.

c. A quieting nylon pivot bushing shall be used to interface between the frame and the pivot brackets.

d. Magnetic catch shall be capable of being mounted on the inside perimeter of the opening and utilize a one-piece plate that does not require adjustments for variations in opening sizes.

e. Stile profile shall be such that it consists of an integral pull.

PANELS

a. 3mm float plate glass mirror (4mm on 3'0" widths), safety backed to conform with Uniform Building Code Standard 24-2, Part II. Safety mirror 400 lb. ft. Impact test ANSI Z-97.1 1984 boil and impact test.

b. Mirror is to be received and mechanically locked into frame components and utilizes a flexible glazing channel.

FINISHES

Bright Gold (Aluminum), Satin Silver


Slimfold Bifold and Overlay Mirrored Doors

GENERAL INFORMATION
SERIES SPACESAVER AL Framed Double Overlay Door

Provide SpaceSaver overlay mirror wardrobe doors manufactured by Slimfold Corporation, Dothan, AL in the dimensions shown on the drawings and with the following attributes:

ARRANGEMENT

a. Overlay mirror doors shall consist of two mirror panels framed with anodized aluminum stiles and rails secured together with screws.

b. Overlay mirror doors shall be supported by 12 gage pivot brackets at both the top and bottom and shall be prefinished to match the framing.

c. A quieting nylon pivot bushing shall be used to interface between the frame and the pivot brackets.

d. Magnetic catches shall be capable of being mounted on the inside perimeter of the header opening and utilize a one-piece plate that does not require adjustments for variations in opening sizes.

e. Stile profile shall be such that it consists of an integral pull.

PANELS

a. 3mm float plate glass mirror (4mm on 3'0" widths), safety backed to conform with Uniform Building Code Standard 24-2, Part II. Safety mirror 400 lb. ft. Impact test ANSI Z-97.1 1984 boil and impact test.

b. Mirror is to be received and mechanically locked into frame components and utilizes a flexible glazing channel.

FINISHES

Bright Gold, Satin Silver

Dunbarton Corporation
1101 Technology Drive
Dothan, Alabama 36303
Tel: (800) 633-7553
Fax: (334) 793-7022
E-mail: sales@dunbarton.com
Web site: http://www.dunbarton.com





Sweets app for Revit – Learn More