9150 Commercial and Industrial Slide Gate Operator

Model 9150 operators are designed to operate vehicular slide gates in residential, commercial and industrial applications. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements.

9150 Commercial and Industrial

The Safest Worry-Free Self Adjusting Gate Operators

This Slide Gate Operator delivers the convenience of self-setting limits with the safe operation you expect from a DKS Operator. This operator can be used in residential, commercial or industrial high-use applications, with an innovative fail-safe design which significantly reduces the chance of injury or entrapment and makes this the safest slide gate operator in the market today. Designed to work in many configurations, this operator can be used for front, center or rear drive applications and can be pad or post mounted. The 9150 is offered with a metal or polypropylene (Poly) cover. Operators with the Poly cover inlude the MicroPlus RF Kit (1 TX + 1 REC).

9150 Continuous Use

Dual 9150 Operators at the Los Angeles Harbor Fire Department.

Gate Tracker™

Provides Operator data to companion DKS Access Controller.

Partial Open

Allows long gates to partially open 14 ft (4.2 m) for automobile traffic, or opens gate fully for large trucks or oversized vans.

Unique Design

Allows easy access to all mechanical parts.

Convenient

Built-in power switch and reset switch.

Entrapment Prevention

Automatically assumes fail-safe mode when an entrapment condition exists.

Specifications

Model 9150 with 1/2 HP Motor

• Maximum gate length 30-feet.
• Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. If DC Convenience Open option is installed, maximum gate weight is 800 pounds. Other external factors may affect the performance of the gate operator.)
• 1/2 HP continuous-duty motor.
• 115, 208*, 230*, 460* VAC (*208, 230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
• Operator is shipped with chain brackets and 20-feet of #40 chain.
• Class I, II, III and IV applications.
• Compliant with UL 325 and 991. ETL listed.

  (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment protection devices are required to be installed with this gate operator.

  Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)

Model 9150 with 1 HP Motor

• Maximum gate length 45-feet.
• Maximum gate weight 1500 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. If DC Convenience Open option is installed, maximum gate weight is 1300 pounds. Other external factors may affect the performance of the gate operator.)
• 1 HP continuous-duty motor.
• 115, 208*, 230*, 460* VAC (*208, 230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
• Operator is shipped with chain brackets and 20-feet of #40 chain.
• Class I, II, III and IV applications.
• Compliant with UL 325 and 991. ETL listed.

  (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment protection devices are required to be installed with this gate operator.

  Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)

Mechanical

• Self-adjusting, no maintenance magnetic limits.
• Partial-open feature.
• Anti-tailgating feature.
• Gate tracker reporting output.
• Ports for plug-in loop detectors.
• Two convenience outlets.
• Fail-safe release (fail-secure optional).
• Programming switches.
• Built-in reset switch.
• Built-in power On/Off switch.

GATE TRACKERTM

• Reporting output provides operator data to DKS 1833, 1835, 1837 or 1838 access control system (requires 2358 expansion board)

MISCELLANEOUS

• Environmental: 10°F to 140°F (-12°C to 62°C)
• Thermostatically controlled heater kit recommended for colder environments.
• Operator requires monitored Type B1 and/or Type B2 entrapment protection devices

OPTIONS

• Nickel plated chain.
• Plug-in loop detectors.
• Heater kit for cold environments.
• Base plate to post mount this operator (does not include posts).
• Surge suppressors.

See More

See Less