DoorKing, Inc. -6050 / 6100 Residential and Commercial Swing Gate Operator

DOWNLOADS

The Model 6050 and 6100 operators are designed to operate vehicular swing gates in residential and commercial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications.


Category: industrial gate hardware | industrial gate operators | industrial gate operators...

MasterFormat: Fences and Gates | Gate Operators



DoorKing, Inc.
120 S. Glasgow Avenue
Inglewood, CA 90301
Tel: (800) 826-7493
Fax: (310) 641-1586

info@doorking.com

https://www.doorking.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


6050 / 6100 Residential and Commercial Swing Gate Operator

Aesthetically Pleasing - Original Quiet Design

The Model 6050 and 6100 operators are designed to operate vehicular swing gates in residential and commercial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation.

With safety in mind, these Operators contain an electronic and mechanical inherent reverse system for two methods of obstruction detection. The automatic electronic limits, along with the microprocessor-based electronic control board provide advanced features not typically found in Operators in this class.

Low Visibility Gate Operators

Provides a cleaner looking install.

Smooth Operation

Soft Start / Soft Stop provides smooth gate operation.

Arm Joint Cover

Helps to eliminate pinch points and protects against harsh weather.

Loop Detectors

Easy plug-in ports for DKS Loop Detectors.

Entrapment Prevention

System reverses gate on contact to prevent injury and damage.

Unique Design

Simplifies installation and provides easy access to all internal parts.

Specifications

Model 6050

  • Maximum gate width 10-feet.
  • Maximum gate weight 400 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator).
  • Swings gate 90 degrees in approximately 10-seconds.
  • 1/2 HP limited-duty motor.
  • 115 VAC, 4.3 Amps.
  • Class I applications.
  • Compliant with UL 325 and 991. ETL Listed.

    (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment protection devices need to be installed with this gate operator.

    Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions (operator only): 13.5″W x 11″H* x 23″D (* Height of operator only. Actual height above ground is determined by which mounting method is used)

Model 6100

  • Maximum gate width 14-feet.
  • Maximum gate weight 500 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
  • Swings gate 90 degrees in approximately 10-seconds.
  • 1/2 HP continuous-duty motor.
  • 115 VAC, 5.4 Amps.
  • Class I and Class II applications.
  • Compliant with UL 325 and 991. ETL listed.

    (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment protection devices may need to be installed with this gate operator.

    Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions (operator only): 13.5″W x 11″H* x 23″D (**27.75″D with convenience open option) (* Height of operator only. Actual height above ground is determined by which mounting method is used)

Gate TrackerTM

Reporting output provides operator data to a DKS 1833, 1835, 1837 or 1838 access control system (requires 2358 expansion board)

Mechanical

  • Self-adjusting, no maintenance magnetic limits.
  • Overlap feature for dual swing gate operation.
  • Designed with a built-in primary and secondary entrapment prevention system.
  • Ports for plug-in loop detectors.
  • Fail-safe release.
  • Tamper detect circuit.
  • Gate tracker reporting output.
  • Programming switches.
  • Built-in reset switch.
  • Built-in power On/Off switch.

Electrical

  • Self-adjusting, no maintenance magnetic limits
  • Auto-close timer (1-23 seconds)
  • Gate overlap feature for bi-parting (dual) gate operation
  • Simple connection for secondary operator in bi-parting gate systems
  • Tamper protect feature
  • Built-in On / Off switch
  • Built-in alarm reset switch
  • Selectable shadow / reverse loop function
  • Magnetic lock output
  • Ports for plug-in open and reverse loop detectors (DKS plug-in detectors only)

Miscellaneous

  • Environmental: 10°F to 140°F (-12°C to 62°C)
  • Thermostatically controlled heater kit recommended for colder environments
  • Operator requires monitored Type B1 and/or Type B2 entrapment protection devices

Options

  • Bi-parting gate connection cable (6050 secondary operator is shipped with 30-feet of cable; 6100 secondary operator is shipped with 40-feet of cable.)
  • Post or pad mount - specify which.
  • Plug-in loop detectors.
  • Heater kit for cold environments.
  • Surge suppressors.


See More


Specifications

Dimensions and Weight – Model 6100

Dimensions (operator only): 13.5″W x 11″H* x 23″D (**27.75″D with convenience open option) (* Height of operator only. Actual height above ground is determined by which mounting method is used)

Dimensions and Weight – Model 6050

Dimensions (operator only): 13.5″W x 11″H* x 23″D (* Height of operator only. Actual height above ground is determined by which mounting method is used)