DoorKing, Inc. - 9200 Series

9200 Series Model: 9200 Series DoorKing's Maximum Security operators are designed to operate vehicular slide gates in limited (Class III) and restricted (Class IV) applications only. These operators should never be used in applications serving the general public. These operators are designed so...


MasterFormat: Gate Operators



DoorKing, Inc.
120 S. Glasgow Avenue
Inglewood, CA 90301
Tel: (800) 826-7493
Fax: (310) 641-1586

info@doorking.com

http://www.doorking.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview



9200 Series - 9200 Series

9200 Series


Model: 9200 Series

DoorKing's Maximum Security operators are designed to operate vehicular slide gates in limited (Class III) and restricted (Class IV) applications only. These operators should never be used in applications serving the general public. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. Center mounting the operator requires the pedestal mounting base (optional on 9210, 9220). The speed control on these operators (except 9210) allows the user to set the speed of the gate from 1/2 to 2 feet/sec., and provides slow-start and slow-stop functions as well.


Features
  • Solid state motor control - no relay contacts to wear out or burn
  • Adjustable speed motor drive, and slow-start / slow-stop
  • Direct drive limit switches for precise gate control, and easy adjustment
  • Direct driven limit nuts.
  • Anti-tailgating feature.
  • Adjustable mid-stop.
  • Gate tracker reporting output.
  • Ports for plug-in loop detectors.
  • Two convenience outlets.
  • Fail-secure operation includes crank for manual operation.
  • Programming switches.
  • Built-in reset switch.
  • Built-in power On/Off switch.
  • Maximum gate length 100-feet.
  • Maximum gate weight 3000 Lb., #60 chain*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
  • Set speed 1 Ft./sec.
  • 40:1 gear reduction running in a continuous oil bath.
  • 1 HP continuous-duty motor.
  • 115, 208, 230 VAC single-phase, 208, 230, 460 VAC three-phase.
  • Operator is shipped with chain brackets and 20-feet of #60 chain.
  • Class III and IV applications only.
  • ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment prevention devices are required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions: 20 "W x 35.5"H x 18"D
  • Maximum gate length 100-feet.
  • Maximum gate weight 2000 Lb., #60 chain*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
  • Adjustable solid state speed control, 1/2 to 2 Ft./sec.
  • Slow start / slow stop function.
  • 40:1 gear reduction running in a continuous oil bath.
  • 2 HP continuous-duty motor.
  • 208, 230 VAC single or three-phase.
  • Operator is shipped with chain brackets and 20-feet of #60 chain.
  • Class III and IV applications only.
  • ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or B2 entrapment prevention devices are required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions: 20 "W x 35.5"H x 18"D
  • Maximum gate length 100-feet.
  • Maximum gate weight 5000 Lb., #60 chain*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
  • Adjustable solid state speed control, 1/2 to 2 Ft./sec.
  • Slow start / slow stop function.
  • 40:1 gear reduction running in a continuous oil bath.
  • 3 HP continuous-duty motor.
  • 208, 230 VAC three-phase.
  • Operator is shipped with chain brackets and 20-feet of #60 chain.
  • Class III and IV applications only.
  • ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or B2 entrapment prevention devices are required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions w/pedestal: 31.5 "W x 47 "H x 16.5"D
  • Maximum gate length 100-feet.
  • Maximum gate weight 3000 Lb., #60 chain*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
  • Adjustable solid state speed control, 1/2 to 4 Ft./sec.
  • Emergency Close 6 Ft./sec.
  • Slow start / slow stop function.
  • 10:1 gear reduction running in a continuous oil bath.
  • Disc brake.
  • 3 HP continuous-duty motor.
  • 208, 230 VAC three-phase.
  • Operator is shipped with chain brackets and 20-feet of #60 chain.
  • Class III and IV applications only.
  • ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or B2 entrapment prevention devices are required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions w/pedestal: 31.5 "W x 47"H x 16.5"D
  • Maximum gate length 100-feet.
  • Maximum gate weight 8000 Lb., #80 chain*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
  • Adjustable solid state speed control, 1/2 to 2 Ft./sec.
  • Slow start / slow stop function.
  • 40:1 gear reduction running in a continuous oil bath.
  • 3 HP continuous-duty motor.
  • 208, 230 VAC three-phase.
  • Operator is shipped with chain brackets and 20-feet of #80 chain.
  • Class III and IV applications only.
  • ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or B2 entrapment prevention devices are required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions w/pedestal: 31.5 "W x 47"H x 16.5"D


DoorKing, Inc.
120 S. Glasgow Avenue
Inglewood,  CA USA 90301 
Tel: (310) 645-0023
Fax: (310) 641-1586
Tollfree: (800) 826-7493
info@doorking.com
Website: http://www.doorking.com

Sweets app for Revit – Learn More