DoorKing, Inc. - 1603 AutoSpikes

DOWNLOADS
1603 AutoSpikes Model: 1603 AutoSpikes The DKS model 1603 Barrier Gate Operator / Automated Spike System is designed as a modular system allowing for easy flexibility in different applications and easy installation. The 1603 operator is designed with many advanced features and mechanically links...

Category: barrier gates | one-way spikes | traffic control spikes...

MasterFormat: Vehicle and Pedestrian Equipment | Parking Control Equipment | Parking Gates...



DoorKing, Inc.
120 S. Glasgow Avenue
Inglewood, CA 90301
Tel: (800) 826-7493
Fax: (310) 641-1586

info@doorking.com

http://www.doorking.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview



1603 AutoSpikes - 1603 AutoSpikes

1603 AutoSpikes


Model: 1603 AutoSpikes

The DKS model 1603 Barrier Gate Operator / Automated Spike System is designed as a modular system allowing for easy flexibility in different applications and easy installation. The 1603 operator is designed with many advanced features and mechanically links the spikes to the barrier arm. The surface mount spikes are easy to install and do not require any trenching or excavating. The 1603 auto-spike system is ideal for parking lots, rental car agencies, schools, car dealerships, government agencies, or in any application where a higher degree of traffic control is preferred.

A complete 1603 / auto-spike system consist of several different components. A typical system will require a 1603 operator, transfer box (transfer box is factory installed to the 1603 operator), tunnel section(s) as needed, spike section(s) as needed, end cap, barrier arm, and arm hardware kit. A traffic signal and/or warning sign is required with this system. Contact your professional DKS system installer, or DoorKing, for more information on complete system requirements.


Features
  • Surface mount spikes install easily without trenching and double as a speed bump
  • Transfer box provides direct mechanical linkage between the barrier operator and spikes
  • Spikes available in 3 foot sections
  • Magnetic limit control.
  • Ports for plug-in loop detectors.
  • Automatic sequencing inputs for use with slide and swing gate operators.
  • Up input memory buffer.
  • Down memory option.
  • Multiple up commands.
  • Two convenience outlets.
  • Gate tracker reporting output.
  • Programming switches.
  • Built-in power On/Off switch.
  • Left or right hand mount.
  • 14 ft. aluminum barrier arm (not included, order separately).
  • Barrier arm hardware kit (not included, order separately).
  • Manual Crank kit available (1601-270).
  • 1/2 HP continuous-duty motor.
  • 115, 230°, 460° VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
  • 40:1 gear-box running in a continuous oil bath.
  • Arm rotates 90° in approximately 1.5 seconds.
  • Class II, III and IV applications.
  • Compliant with UL 325 and 991. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions: 15.25"W x 43.5"H x 15.5"D.
  • Tunnel sections surface mount: 31"W x 3"H x 24 or 36"L
  • Spike sections surface mount: 31"W x 3"H x 36"L
  • End Cap: 31"W x 3"H x 12.25"L


Aluminium 14 3 in. Round Yes

DoorKing, Inc.
120 S. Glasgow Avenue
Inglewood,  CA USA 90301 
Tel: (310) 645-0023
Fax: (310) 641-1586
Tollfree: (800) 826-7493
info@doorking.com
Website: http://www.doorking.com

Sweets app for Revit – Learn More