Crown Industrial -Concealed Stay Roller, No Tail-Zinc

DOWNLOADS

Item: CRS14S

Minimum Door Thickness: 1-3/4", if used with #CRSC14 Bottom Guide Channel.

Purpose:
• For doors less than 1-3/4" thick, this roller can roll on the face of the door.


Category: door tracks | sliding door hardware | sliding door tracks...

MasterFormat: Hardware | Door Hardware | Sliding and Folding Door Hardware*



Crown Industrial
213 Michelle Court
South San Francisco, CA 94080
Tel: (650) 952-5150
Fax: (866) 891-5841

autodor@crown-industrial.com

https://www.crown-industrial.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Concealed Stay Roller, No Tail-Zinc

Item: CRS14S

Minimum Door Thickness: 1-3/4", if used with #CRSC14 Bottom Guide Channel.

Purpose:
• For doors less than 1-3/4" thick, this roller can roll on the face of the door.
• For doors 1-3/4" or more in thickness use this roller with the #CRSC14 concealed stay roller channel. Ideal for single slide, bi-parting, and by-passing sliding doors where the roller is to be concealed. Bottom of door must be prepared with a 1-1/4" x 1-1/4" continuous slot to accommodate the concealed stay roller channel.

Function:
A stationary floor mounted stay roller that is mounted at the edge of the opening in the direction the door slides, where the door overlaps the opening. The door with the #CRSC14 concealed stay roller channel slides over the stay roller. This stay roller can also roll on the face of thinner doors.

Fasteners Included: (1 ea.) #12-14 x 2-1/2" Pan Head Phillips Sheet Metal Screw, Zinc. & Shim Washers.


See More


Sweetsstakes