Claridge Products -Series 1 - Markerboards, Chalkboards & Tackboards

DOWNLOADS

  • LCS3 Porcelain enamel steel markerboards and chalkboards
  • Perimeter trim is 1 1/2” wide
  • Type A units have screw-through map rail at top; angle clips for bottom. Type CO and Combos - angle clips 2’ on center top and bottom.


Category: conference room equipment | magnetic writing surfaces | marking boards...

MasterFormat: Information Specialties | Visual Display Units | Chalkboards...



Claridge Products
601 Highway 62-65 South
PO Box 910
Harrison, AR 72602
Tel: (800) 434-4610
Fax: (870) 743-1908

claridgemarketing@claridgeproducts.com

https://claridgeproducts.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Series 1 - Markerboards, Chalkboards & Tackboards

  • LCS3 Porcelain enamel steel markerboards and chalkboards
  • Perimeter trim is 1 1/2” wide
  • Type A units have screw-through map rail at top; angle clips for bottom. Type CO and Combos - angle clips 2’ on center top and bottom.
  • Claridge Cork, Fabricork, Designer Fabric, Hook-Fab, and Tan Nucork Tackboards
  • Satin anodize aluminum frame (can be powder coated)
  • Maximum length, 16’0”; maximum height - Type A and Type CO units - 4’0”
  • O.A. panel thickness approx. 1/2”
  • LCS3 markerboards and chalkboards are GREENGUARD Certified

Finished size of units is ¼” larger in height and width than sizes listed. If exact overall size is required, specify when ordering.

Installation using 16A adhesive is recommended. Screws or wall anchors are not included.

Freight class 70.

OPTIONS:

  • Color anodize or powder coat finish aluminum frames
  • Typical arrangements for markerboard, chalkboard, tackboard and combination board units shown below


See More


Sweetsstakes