Citadel Architectural Products, Inc. - Panel 20® Metal Composite Material(MCM)

DOWNLOADS
Panel 20® is a composite panel for exterior use made by laminating an aluminum skin to a substrate of thermoset phenolic resin. A second aluminum skin is added as a backer and provides thermal stability and panel balance.

Category: composite wall panels | flat wall panels | metal panels...

MasterFormat: Roofing and Siding Panels | Metal Wall Panels | Composite Wall Panels...



Citadel Architectural Products, Inc.
3131-A North Franklin Road
Indianapolis, IN 46226
Tel: (800) 446-8828
Fax: (317) 894-6333

info@citadelap.com

http://www.citadelap.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Panel 20® Metal Composite Material(MCM)

Panel 20® is a composite panel for exterior use made by laminating an aluminum skin to a substrate of thermoset phenolic resin. A second aluminum skin is added as a backer and provides thermal stability and panel balance. This system is designed for use as exterior cladding on walls, canopies, fascias, and accent bands. However, Panel 20® is also ideal for other applications where a high end look is desired.

Similar to Envelope 2000®, Panel 20® is impact resistant, water resistant, and provides ultimate smoothness in a wide variety of finishes. However, Panel 20® is installed using a variety of moldings, saving on the fabrication and installation costs.

Attached to the substrate with concealed screws, Panel 20® offers two piece aluminum moldings to complete the panel joints. These moldings (available in batten and reveal profiles) consist of plastic receiver attached prior to the panel, then finished with a prepainted cover to match or complement the panel.

In addition to perimeter fastening, Panel 20® should be adhered to the substrate in the field of the panel.

Installation is non-progressive when using these moldings allowing panels to be removed and replaced should damage occur.


See More

Features
  • Impact resistant thermoset phenolic resin core

  • Simple 'sheets & sticks' installation saves time & money

  • Dense core provides ultimate panel flatness

  • Available in Kynar 500®, metallics & anodized finishes

  • Can be curved to form clean, graceful lines


Specifications

Composition & Materials
Component Standard (in) Metric (mm)
• Prefinished Smooth Aluminum Face
• Thermoset Phenolic Resin Core
• Primed Smooth Aluminum Backer
.024"
.075"
.024"
.609mm
1.90mm
.609mm
Panel Weight & Thickness
Property Standard (in) Metric (mm)
• Panel Weight
• Nominal Thickness
1.29 lbs/ft²
1/8"
6.30 kg/m²
3mm
Sizes Available
4' x 8'
4' x 10'
4' x 12'
5' x 8'
5' x 10'
5' x 12'
48" x 96"
48" x 120"
48" x 144"
60" x 96"
60" x 120"
60" x 144"
(1219mm x 2438mm)
(1219mm x 3048mm)
(1219mm x 3658mm)
(1524mm x 2438mm)
(1524mm x 3048mm)
(1524mm x 3658mm)
Warranty
Panel Lamination 5 Year Warranty
Sweets app for Revit – Learn More