CENTRIA International -Architectural Design Panel ADP100

DOWNLOADS

CENTRIA ADP 100 Architectural Design Panels provide an economical and attractive solution to a wide range of non-structural standing seam roof applications. ADP 100 Panels offer a thin seam design with concealed fastener clips that make them ideal for mansards and fascia.


Category: batten seam roofing | low slope metal roofing | mansards...

MasterFormat: Roofing and Siding Panels | Metal Roof Panels | Flashing and Sheet Metal...



CENTRIA International
1005 Beaver Grade Road
Moon Township, PA 15108
Tel: (800) 759-7474
Fax: (412) 299-8317

http://global.centria.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Architectural Design Panel ADP100

CENTRIA ADP 100 Architectural Design Panels provide an economical and attractive solution to a wide range of non-structural standing seam roof applications. ADP 100 Panels offer a thin seam design with concealed fastener clips that make them ideal for mansards and fascia.

Features:

  • Substrates:
    • Standard 24 [.60mm] gage G90 Galvanized
  • Panel Width:
    • 12" [305mm], 16" [406mm] and 18" [457mm] widths available
  • Panel Length:
    • 40' [12.19m] standard length; Longer lengths available
  • Panel Height:
    • 1" [25mm] nominal batten height
  • Slope:
    • Minimum slope 3:12 [76mm:305mm]
  • Other Details:
    • Standard striated pan; Optional flat pan*
    • Snap-on battens reduce installation time and cost
    • Clip attachment
    • Non-mechanically seamed
    • Factory sealant applied in batten

*Oil canning within mill tolerance is not a cause for rejection. 18" [457mm] wide panels must be striated.


See More


Sweetsstakes