High Seam Tee-Panel Standing Seam System

Providing a taller seam option, an additional finish option and wider coverage than the Tee-Panel, the Berridge High Seam Tee-Panel is designed to provide additional options for creating stunning residential or commercial designs over solid sheathing. This 1″ or 1 ½” high panel can be used for straight or curved applications.

Materials
24 and 22 Gauge Steel
0.032 Aluminum

Specifications
Uses: Roof, Fascia**
Coverage: 18 ¼"
Finishes: Striated, optional smooth
Fasteners: Concealed
Applications: Solid sheathing
Seam: 1" or 1 ½" snap-on with extruded vinyl weatherseal

Installation
Panel is available from the factory in continuous lengths to a maximum of 40’
May be site formed in continuous lengths with the Berridge SS-1421 Roll Former
Extruded vinyl weatherseal is an integral part of snap-on seam cap and prevents siphoning or flooding over seam
Extra snap-on seam caps are factory formed to a maximum of 40’
Use Seam Sleeve for splicing snap-on seams
Entire roof area shall be covered with Berridge approved underlayment
Use 1” or 1 1/2”Tee-Clip*
Use 1” or 1 1/2” Stainless Tee-Clip with Aluminum panels*

Note: * Consult the Berridge Technical department or the High Seam Tee-Panel downloads for clip spacing ** Fascia can not be curved or tapered. Please consult the High Seam Curved or Tapered Tee-Panel page for more information on the panel’s curving and tapering abilities.

See More

See Less