Battic Door Attic Access Solutions -The Fireplace Plug - A Draft Stopper For Your Chimney

DOWNLOADS

The Large Fireplace Plug is an inflatable urethane plug measuring 38" x 16". It is quickly and easily installed in the fireplace just below the damper level.

The Fireplace Plug can be adapted to work in almost all fireplaces.


Category: chimney | draft control devices | fireplaces...

MasterFormat: Fireplaces and Stoves | Fireplace Specialties | Central Heating Equipment...



Battic Door Attic Access Solutions
P.O. Box 15
Mansfield, MA 02048
Tel: (508) 320-9082
Fax: (774) 215-5860

info@batticdoor.com

https://www.batticdoor.com

Request More Info

DOWNLOADS

Related Products

Overview


The Fireplace Plug - A Draft Stopper For Your Chimney

The Large Fireplace Plug is an inflatable urethane plug measuring 38" x 16". It is quickly and easily installed in the fireplace just below the damper level.

The Fireplace Plug can be adapted to work in almost all fireplaces. Even if you have an unusual construction, the Fireplace Plug can be successfully installed in less than 2 minutes.

The Fireplace Plug is provided with 5 "slittable" areas that can be cut to provide an opening for a damper handle. As the Plug is inflated it seals around the damper handle sealing the opening!

Here are 3 tips that should assist you with a fast and easy install for our large plug:

1. Lower the air pressure so the plug is not hard. If you put in too much air it will become stiff and could create gaps. The plug should seal all gaps and conform to the shape of the fireplace.

2. Lower the pole and install in a "V" not a "^". After you insert it tuck the front and back up. Then add a little more air so it seals.

3. Please note that it is not always necessary to make a slit to accommodate the damper handle. Trial fit the plug first without making any slit for the damper handle. If the damper handle is in the way, open the damper to move the handle, or remove the handle temporarily.


See More


Sweetsstakes