RHA Equipment Access Single Leaf Aluminum

Acudor Aluminum Equipment Access Roof Hatches are designed to provide convenient, economical access to the roof of a building where larger openings are required. This opening allows for equipment to be installed or removed from a building through the roof.

Double-skin construction (“in box type design”) with 1" Polyiso (R-6) insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft., the cover is 1/8" thick aluminum with a 20 gauge aluminum inside liner.

1/8" thick aluminum with 1" thick Polyiso (R-6) insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange an pre-drilled mounting holes.

Heavy duty Aluminum pintle hinges with 3/8" SS pin

Gas spring operators allow cover to open and close with ease. Stainless Steel Inside pull handle allows for easy control when closing cover.

Self latching, Stainless steel outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.

Mill finish.

Stainless Steel Hardware standard on all hatches

EPDM foam weather/draft seal gaskets provides weather tight construction

1" Polyiso (R-6) insulation standard on all hatches

Supports 40lbs./sq. ft. live load

See More

See Less