SVA Smoke Vent Single Leaf Aluminum

Acudor Smoke Vents are designed to provide an economical solution for fire ventilation by removing deadly smoke, heat, and gases from a burning building. Single leaf Smoke Vents are used for smaller areas that need venting, including elevator shafts and stairwells. Single leaf units are not U.L. Listed.

Double-skin construction (“in box type design”) with 1" Polyiso (R-6) insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft., the cover is 1/8" thick aluminum with a 20 gauge aluminum inside liner.

1/8" Aluminum with 1" thick Polyiso (R-6) insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.

Aluminum pintle hinges with 3/8" pin

Gas spring operators allow cover to open and close with ease. Inside and outside release allows for manual lid operation.

Self latching Slam Latch. Supplied standard with 165° UL Listed Fusible Link. Resettable McCabe link available.

Mill Finish

1/8" thick aluminum

12" high insulated curb

High performance gas springs

Inside and Outside manual release

UL Listed Fusible or McCabe Resettable Link

Stainless Steel Hardware

See More

See Less