RHGDD Domed Access Door Galvanized

Acudor Galvanized Domed Roof Hatches are designed to provide convenient, economical access to the roof of a building. These hatches are standard with a Polycarbonate Dome which provides the benefit of a skylight.

Double-skin construction (“in box type design”) with 1" Polyiso (R-6) insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft., the cover is 1/8" thick aluminum, with a 20 gauge aluminum inside liner. To accommodate the polycarbonate domes, an aluminum extrusion with built in condensation drainage channel is provided.

14 gauge galvanized steel with 1" thick Polyiso (R-6) insulation with Fiberglass liner at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.

Heavy duty galvanized steel pintle hinges with 3/8" SS pin

Gas spring operators allow cover to open and close with ease. Stainless Steel inside pull handle allows for easy control when closing cover.

Self latching, Stainless Steel outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.

Material is prepared with an iron phosphate wash, followed by a rust inhibiting primer, and then a baked on polyester enamel grey paint.

Clear, bronze, white, combination polycarbonate double-skin dome

Stainless Steel Hardware standard on all hatches

1" Polyiso (R-6) insulation standard on all hatches

EPDM foam weather/draft seal gaskets provides weather tight construction

See More

See Less