Acudor Products, Inc. -RHADD Domed Access Door Aluminum

DOWNLOADS

Acudor Galvanized Domed Roof Hatches are designed to provide convenient, economical access to the roof of a building. These hatches are standard with a Polycarbonate Dome which provides the benefit of a skylight.


Category: aluminum hatches | insulated roof hatches | personnel hatch...

MasterFormat: Roof and Wall Specialties and Accessories | Roof Accessories | Roof Hatches...



Acudor Products, Inc.
9 Woodland Road
Unit A
Roseland, NJ 07068
Tel: (800) 722-0501

info@acudor.com

https://acudor.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


RHADD Domed Access Door Aluminum

Acudor Galvanized Domed Roof Hatches are designed to provide convenient, economical access to the roof of a building. These hatches are standard with a Polycarbonate Dome which provides the benefit of a skylight.

Cover

Double-skin construction (“in box type design”) with 1" Polyiso (R-6) insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft., the cover is 1/8" thick aluminum, with a 20 gauge aluminum inside liner. To accommodate the polycarbonate domes, an aluminum extrusion with built in condensation drainage channel is provided.

Curb

14 gauge galvanized steel with 1" thick Polyiso (R-6) insulation with Fiberglass liner at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.

Hinge

Heavy duty galvanized steel pintle hinges with 3/8" SS pin

Opening

Gas spring operators allow cover to open and close with ease. Stainless Steel inside pull handle allows for easy control when closing cover.

Door Latch

Self latching, Stainless Steel outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.

Finish

Material is prepared with an iron phosphate wash, followed by a rust inhibiting primer, and then a baked on polyester enamel grey paint.

Product Highlights

Clear, bronze, white, combination polycarbonate double-skin dome

Stainless Steel Hardware standard on all hatches

1" Polyiso (R-6) insulation standard on all hatches

EPDM foam weather/draft seal gaskets provides weather tight construction


See More


Specifications

Specifications
RHG STANDARD SIZES

(Other sizes available)

Curb ID W&LWeight per Hatch
Modelinches (mm)lbs. (kg.)
AD323224 X 24 (610 X 610)125 (56.8)
AD324424 X 36 (610 X 914)135 (61.4)
AD383830 X 30 (762 X 762)140 (63.5)
AD384430 X 36 (762 X 914)155 (70.5)
AD444436 X 36 (914 X 914)170 (77.3)