AW-APS Flood/Gas/Odor Resistant Floor Door
The Acudor AW-APS is an aluminum floor door designed for interior and exterior applications where flood, gas, or odor resistance is required.
Material:Aluminum door & frame ; Type 316 Stainless steel hinges & hardware
Door:1/4" aluminum diamond plate reinforced for live load of 1560 pounds/per sq. ft. Capable of holding up to 25 ft. head of water (Downward pressure only).
Frame:3/8" aluminum with 3/16” x 1 1/2” strap anchors welded around the frame for casting into concrete
Hinge:Type 316 stainless steel butt hinges with tamper proof stainless steel bolts and nuts
Gasket:9/16” O.D. x 1/8” I.D. EPDM gasket
Opening Device:Automatic hold open arm with red vinyl grip allows door to open to 90 degrees, locking door in open position and allowing for easy control when closing door panel. Optional Lift Assist available.
Standard Latch:Type 316 stainless steel watertight cam locks and flush watertight handle.
Finish:Mill finish is standard, Bituminous coating optional on exterior of frame.
Design:This design has been hydrostatically tested to hold up to 25 ft. of water for a period of 10 minutes. (Downward pressure only) A copy of the test report is available upon request.
Product Highlights Diamond plate door panel is reinforced for a live load of 1560 pounds/sq ft. Capable of holding up to 25 ft. head of water (Downward pressure only).
Angle frame construction with anchors welded around the frame for casting into concrete.
Door panel overlaps frame, compressing the gasket providing a continuous seal.
EPDM gasket and cam locks designed so door will not leak from standing water, and to reduce the amount of gases and odor that can escape from below.
See More
See Less