Acoustical Surfaces, Inc. -Fabric Wrapped Custom Acoustical Wall Panels

DOWNLOADS

Decorative Fabric Wrapped Custom Acoustical Wall Panels

  • High Performance
  • Architecturally Decorative
  • Custom Engineered & Manufactured
  • Reduced Noise & Reverberation
  • 100% Custom Colors and Sizes


Category: absorbers | acoustic paneling | interior paneling...

MasterFormat: Wall Finishes | Acoustic Treatment | Acoustic Insulation...



Acoustical Surfaces, Inc.
123 Columbia Court North Suite 201
Chaska, MN 55318
Tel: (800) 470-6652
Fax: (952) 448-2613

sales@acousticalsurfaces.com

https://www.acousticalsurfaces.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Fabric Wrapped Custom Acoustical Wall Panels

Decorative Fabric Wrapped Custom Acoustical Wall Panels

  • High Performance
  • Architecturally Decorative
  • Custom Engineered & Manufactured
  • Reduced Noise & Reverberation
  • 100% Custom Colors and Sizes

Product Specs

Material

6 lb. density glass fiber with woven fabric and micro-perforated vinyl facings.

Pattern

Flat-faced with square or radiused corners, beveled, radiused or mitered edges.

Features

Custom designed and manufactured to meet every need. Soft or hard edges

Applications

These decorative sound absorbing panels are great for offices, schools, meeting rooms, music rooms, hotels, auditoriums, recording studios, broadcasting studios. These acoustic wall panels are perfect for any space where good speech privacy or speech intelligibility is important.

Thickness

1″, 1-1/8″, 2″, 2-1/8″

Size

Custom Up to 4′ × 10′

Colors

Acoustical cloth comes in a wide range of standard colors and custom colors are available for woven fabrics and perforated vinyls.

Flammability

ASTM E84, Class A. Flame Spread: 15; Smoke Developed: 40

Installation

Adhesive, Hook & Loop Fasteners, Mechanical Clips, Impaling Clips, magnetic clips.


See More


Specifications

Fabrisorbâ„¢ Wall panel - Sound Absorption Coefficients
6-7 PCF Glass Fiber125Hz250Hz500Hz1KHz2KHz4KHzNRC
1″.14.27.801.111.141.14.85
2″.22.811.241.301.211.161.15
Edge Details - Fabric Wrapped Panel Rotofast Snap-On Anchor Kit
One hardware pack is needed for each mounting location. The Rotofast Snap-On Anchor is screwed into the back of the panel. The marking plug is inserted into the anchor, then panel is pushed against wall to mark anchor locations. The ratchet is screwed into the wall at marked locations. Firmly push panels onto ratchets to complete installation.
Install LocationWall or Ceiling
Parts Included(1) × Rotofast snap-on anchor with ratchet
(1) × Marking plug
(1) × Wall anchor
(1) × 2″ #8 Screw
(1) Rotofast Snap-On Hex Tool
NoteMultiple kits ordered together will only include (1) Rotofast Snap-On Hex Tool and up to (6) Marking plugs.
Edge Details - Impaling Clips and Adhesive
Edge Details - Impaling Clips and Adhesive
One impaling clip is needed for each mounting locationImpaling clips are installed onto the wall to support the weight of the panels until a construction adhesive dries.
Install LocationWall
Parts Included(1) × Impaling Clip
Recommended Adhesive
(sold separately)
Titebond Green Choice Adhesive (ASTSA28)
Part NumberHWIMP33
Edge Details - Fabric Wrapped Panel Hardware Pack - Impaling Clip
Edge Details - Fabric Wrapped Panel Hardware Pack - Impaling Clip
One hardware pack is needed for each mounting locationDrywall anchors are installed into the drywall and the screws hold the impaling clip to the anchor. Impaling clips are installed onto the wall to support the weight of the panels until a construction adhesive dries.
Install LocationWall
Parts Included(1) × Impaling Clip
(2) × Drywall Anchors
(2) × ¾″ Screws
Recommended Adhesive
(sold separately)
Titebond Green Choice Adhesive (ASTSA28)
Part NumberHWFWPIMP
Edge Details - Fabric Wrapped Panel Hardware Pack 1
Edge Details - Fabric Wrapped Panel Hardware Pack 1
One hardware pack is needed for each mounting locationThe drywall anchors are installed onto the drywall and the screws hold one of the plastic clips to the wall. The remaining ¾″ screws are used to mount the remaining plastic clip to the mounting plate on the back of the panel. Adhesive can be used to hold the clips together to prevent the clips from detaching from one another.
Install LocationWall or Ceiling
Parts Included(1) × Mounting Plate (factory-installed on the back of the panel)
(2) × 3″ Plastic Z-bars
(2) × Drywall Anchors
(4) × ¾″ Screws
Part NumberHWFWPHP1
NotePlastic clips are also available in 21″, 47″, and 96″ lengths.
Edge Details - Fabric Wrapped Panel Rotofast Standard Anchor Kit
Edge Details - Fabric Wrapped Panel Rotofast Standard Anchor Kit
One hardware pack is needed for each mounting location. The Rotofast Standard Anchor is screwed to the wall. Mark anchor locations on panel. Push metal insert into anchor body. Position panel at pre-marked locations and push hex tool through panel face to engage anchor. Turn clockwise approximately two revolutions. Pull the driver out.For panels with tightly-woven fabric, leather, vinyl, or other specialty covering, the Rotofast Snap-On Anchor is recommended.
Install LocationWall
Parts Included(1) × Rotofast standard anchor
(1) × Wall anchor
(1) × 2″ #8 Screw
(1) Rotofast standard hex tool
(1) Rotofast standard driver tool
NoteMultiple kits ordered together will only include (1) Rotofast standard hex tool and (1) Rotofast standard driver tool.
Edge Details - Fabric Wrapped Panel Rotofast Snap-On Anchor Kit
Sweetsstakes