ADVANTA™
SHINGLE
Dimension Metal Shingle ATAS International, Inc. Corporate Headquarters:
Toll-Free: (800) 468-1441
Product Presentation ADVANTA™ Shingle is designed to function as an alternative to traditional asphalt shingles. Weighing less than a pound per square foot, the shingle is well suited for new construction or re-roof applications. Sizes and Profiles: ADVANTA Shingles measure 14" x 36 ½", with a 3 square-foot coverage area. The panel configuration provides the appearance of dimensional shingles, but it covers twice the area per panel than traditional shingles. Only 34 panels are required to cover 100 square feet of roof area or one square. Composition and Materials: Shingles are stamped from 29 gauge Metallic Coated steel. Color and Finish: ADVANTA Shingle is textured with an embossed pattern and available in ten (10) standard colors: Mission Red, Slate Grey, Brite Red, Rocky Gray, Forest Green, Char Brown, Redwood, Sierra Tan, Bone White and Coppertone, as well as six (6) designer colors known as the Americana Series. The Americana Series utilizes state-of-the-art print coat technology to create six new shades: Kodiak Island Brown, Mojave Desert Tan, Smokey Mountain Grey, Cap Cod Grey, Carolina Pine Green and Grand Canyon Red. The paint system is a high performance, Kynar 500®
or Hylar 5000® finish that provides maximum protection from
the sun’s harsh UV rays and is non-staining.
Technical Data Paint Finish
Abrasion Resistance, Falling Sand Test: ASTM D-968 - Liters to
expose 5/32" of substrate
Alkali Resistance: ASTM D-1308 - 25% sodium hydroxide, 1 hr.
Chalk Resistance: ASTM D-659, Method A - Florida exposure: 10
years at 45º S.
Color Retention, Florida Exposure: ASTM D-2244 - Florida exposure:
10 years at 45º S.
Film Thickness (Nominal): ASTM D-1005, ASTM D 1400, ASTM D4138 or ASTM D 5796 - Eddy current device or
micrometer
Formability T-Bend: ASTM D-4145
Mandrel Bend Flexibility: ASTM D 522 Impact Resistance: ASTM D 2794 Adhesion: ASTM D 3359 Water Immersion Resistance: ASTM D 870 Gloss: ASTM D-523 - at 60º
Humidity Test: ASTM D-2247 - 100% Relative Humidity at 95º
F
Pencil Hardness: ASTM D-3363 - Eagle Turquoise Drafting Lead
Salt Fog: ASTM B 117 - 5% Salt Fog at 95º F
Cyclic Salt Spray: ASTM D 5894 and ASTM D 5487 Abrasion Resistance, Transit: Proprietary procedure, panels tested
face-to-back
Accelerated Weathering: ASTM D 822 and ASTM G 155, ASTM G 151 or ASTM G 153 Chalking Resistance: ASTM D 4214 Cleveland Condensing Cabinet: ASTM D 4585 Cure Test, MEK Resistance: ASTM D 5402 Flame Spread Rating: ASTM E 84 Panel testing/ratings:
Warranty ADVANTA Shingles are backed by a thirty (30) year limited warranty. Availability and Cost Availability: ADVANTA Shingle is readily available through ATAS product distributors. Valleys, ridge and hip caps, gable and eave trims are available in standard 10-foot lengths. Coil stock is also available in matching colors for field fabrication of custom flashings. Cost:
Installation ADVANTA Shingles are installed horizontally in a left to right manner and staggered from eave to ridge. Fastened to a solid deck with five ring shank roofing nails, the panels’ four-way interlock design guards against wind driven rain and prevents wind uplift. Pre-punched nailing holes are provided to ensure proper fastening of the shingle. Fasteners are covered by the next tier of shingles. Recommended minimum slope is 3 in 12. Installation manuals detailing the application of valley, ridge and trim assemblies are available, as well as hands-on training seminars. Maintenance ADVANTA Shingle is virtually maintenance free and non-staining. If cleaning is required, surface residue is easily removed by conventional cleaning methods. Minor scratches may be touched up with matching manufacturer-supplied paint. Technical Services Complete technical information and literature is available from ATAS International, Inc. ATAS will assist with design ideas and shop drawings. Kynar 500® is a registered trademark of
Elf Atochem North America, Inc.
|