In the U.S.A.:
Hadrian Inc.
7420 Clover Avenue
Mentor, Ohio 44060
Tel: (440) 942-9118
Fax: (440) 942-9618
Toll-Free Fax: (800) 536-1469
Web site: http://www.hadrian-inc.com

In Canada:
Hadrian Manufacturing Inc.
965 Syscon Road
Burlington, Ontario L7L 5S3
Tel: (905) 333-0300
Fax: (905) 333-1841
Web site: http://www.hadrian-inc.com

The Hadrian Essentials

Locker Doors
Hadrian’s standard "Emperor" locker door has exceptional flex-proof strength, rigidity, impressive impact resistance and silence when closing, it is a true hollow metal door, with a double pan box design a full one inch thick. One inch cell honeycomb core is bonded to the inner surfaces of the door’s front and back panels. This safeguards the integrity of the flat surface against blows, and deadens the sound when the door is closed. Additional door strength is achieved by the use of a full length continuous "piano" hinge. Standard door construction has a 20 gauge outer panel welded to a 24 gauge inner panel. For installations subject to extreme abuse requiring additional strength, an optional door with a 16 gauge outer panel is available. The performance is quiet, sure and smooth. The locker is unsurpassed for durability and maintenance-free service.

Single Point Latching

Hadrian’s exceptionally strong door permits single point, reduced maintenance latching. Two basic types are offered, both suitable for use with or without padlocks, or with built in locks. The standard economy friction latch is very low maintenance, as it has no moving parts. Also available is the positive, single point spring latch that secures firmly when the door is closed. In both applications the lock hasp is located within a recessed lock pocket below a recessed number plate. The locker face is clean and uncluttered.

Unobstructed Ventilation
"Emperor" lockers have louvres cut into the top and bottom face of the vertical steel frame members. This creates two ventilation channels that defy blockage. The vents are unobtrusive but effective. Air is allowed to circulate on two sides along the entire height of the locker. The clean, simple face of the unit is preserved. Additionally, perforations in the shelf, top and bottom make air circulation even more efficient.



Powder Coated Finish
Hadrian’s hybrid epoxy powder coating has unsurpassed resistance to abrasions, chemicals, detergents and acids. The surface is hard, with an even, run-free finish. Sheared edges are coated, protecting installers and end users from hazardous sharp edges. Long lasting appearance and function is ensured with this exceptionally maintenance-free coating. "Emperor" lockers have a black frame, standard, but there is no up-charge for any two colors of your choice, from a large selection of designer colors – including 6 special effects finishes which provide increased protection against vandalism and other defacement.

Heavy-duty Coat Hooks, Coat Rods & Bottom Shelf Support
"Emperor" locker tops, hat shelves and bottom shelves are identically formed, interchangeable 22 gauge rigid boxes. Installation is simplified and their strength is equal. As a bottom shelf application the design fits over and around the full width of the lintel, for extra support. On the underside of the hat shelf, firmly secured in place with two fasteners are three single-prong, chrome plated steel coat hooks. Optional is a heavy-duty, chrome plated, 1" O.D. steel coat rod with stainless steel brackets.

Solid "no holes" Locker Back
After assembly, Hadrian’s locker back is clean, without unsightly holes. Free standing lockers have a presentable appearance and the back can be painted to match the front.

Options: For All Applications and Environments

Sloping Top
The angle of the top serves to prevent the accumulation of dust. It is also aesthetically pleasing.

Individual "Box" Base
Provides extra strength, height (3.5") and toe space (1.75") for protection against damage from cleaning. For high moisture areas the base – as well as the entire locker – is available in galvanized steel.

Continuous "Z" Base
Hadrian’s continuous "Z" Base offers an alternative to the standard "box-base" design. Made from heavy-duty, 14 gauge material, the "Z" base is ideal for high abuse installation where extra strength is required.

Locker Benches

Top/Side Trim
For recessed applications this trim for side and top gaps, installs easily. Its flat surface blends with the lockers and has an attractive appearance.

Plenum Panels
Another trim for lockers installed between walls are Plenum panels that fit into U-channels, flush with the locker face (height to suit conditions).

Security
Padlock locking is standard on both "Emperor" and "Gladiator" lockers. Other available locking options are built-in combination locks, key locks and coin-operated locks. Built-in locks have the additional security of the Hadrian special security strike. The lock bolt secures itself behind the bottom lip of the strike. Access to the secured bolt is denied by the full length stop in the door frame and by the top lip of the strike projecting forward and fitting into a slot in the door. This prevents the door and frame from being pried apart.