Kommerling USA
3310 Stanwood Boulevard
Huntsville, AL 35811
Tel: (256) 851-4099
Toll-Free: (800) 330-2239
Fax: (256) 859-7562
Web site: http://www.komatrimboards.com
E-mail: inquiries@komatrimboards.com

Kommerling® offers a variety of products that make KOMA® Trimboards even easier and more convenient to use. Our KOMA® Edge and Center Bead and KOMA® CornerTrim are perfect complements. KOMA® Bond&Fill™ can be used to bond KOMA Trimboards and fill gaps and other voids.

KOMA® Edge and Center Bead

New Technology – Enduring Style
KOMA® Edge & Center Bead provides a modern PVC solution designed to match historical edge and center bead patterns. This versatile, durable product is available in 0.5” x 5.5” x 18' and 0.5” x 3.5” x 18' lengths. Koma offers many important features and benefits:

  • Look and feel of wood with the durability of PVC
  • Manufactured to ensure a quality product that looks like painted wood edge and center bead boards
  • No moisture absorption, warping, cupping or crooking
  • Rich wood-like textured surface with warm matte finish
  • Can be cut and nailed using standard woodworking tool
  • Color-matched with KOMA® Bond&Fill™ for filling nail holes
  • No need to paint, but if painting is desired, no scuffing, sanding or priming required

Perfect for porch ceilings and soffit applications, KOMA Edge & Center Bead has the same outstanding properties as other KOMA Trimboards. It is fabricated for tongue-in-groove installation.

Frequently Asked Questions

Are KOMA® Edge and Center Bead and KOMA CornerTrim of the same quality as KOMA Trimboards?
KOMA Edge and Center Bead and KOMA CornerTrim have the same quality and the same outstanding properties as other KOMA Trimboards.

How do I nail Koma® Edge and Center Bead?
Koma Edge may be edge nailed diagonally through the tongue just like real wood. Flat surface nailing without predrilling is an acceptable nailing method.

Do I need special tools to work with KOMA Edge and Center Bead or KOMA CornerTrim?
No special tools are needed. KOMA Edge and Center Bead and KOMA CornerTrim are easier than wood to work with standard tools.

Will KOMA Edge and Center Bead and KOMA CornerTrim take paint?
If painting is desirable, use standard house paint. All you have to do is clean the surface and paint.

Can I use KOMA® Bond&Fill™ on materials other than KOMA Trimboards, KOMA Edge and Center Bead and KOMA CornerTrim?
KOMA Bond&Fill is specially formulated for PVC. However, it bonds KOMA products to other materials and works equally well with most metals, ABS and wood.

Are KOMA Companion Products covered by a warranty?
All KOMA products carry Kommerling’s strong warranty for your protection.

Are there guidelines for installing KOMA CornerTrim and KOMA Edge and Center Bead?
You may download KOMA Installation Guidelines from literature section at www.komatrimboards.com.

Are any cleaners recommended for use with KOMA Trimboards?
If KOMA Trimboards get dirty, they should be cleaned after installation. We recommend Clorox Cleanup or Soft Scrub. 100 grit sandpaper can also be used on stubborn grains.

What fasteners can be used with KOMA Trimboards?
Any rust-proof woodworking fastener will work with KOMA products. We recommend stainless steel or hot-dipped galvanized fasteners. KOMA products do not require pre-drilling unless a large fastener is use or the product is installed in low temperatures. KOMA Trimboards work well with nail guns, using rust-proof nails. Finishing nails are recommended. You should avoid fine-threaded wood screws and ring-shank fasteners. Holes may be filled with KOMA® Bond&Fill™. KOMA Bond&Fill also should be used to adhere KOMA Trimboards to each other.