BIRD WIRE 2000...We've Got It Wired at the Lowest Industry Prices!

Master Format 1995:
10290 – Bird & Pest Control

Master Format 2004:
10 81 00 - Pest Control Devices
10 81 13 - Bird Control Devices

BIRD WIRE 2000™ is the the most discreet, low-profile anti-perching deterrent available. It is designed for ledges and areas where large birds have been temporarily “resting”, and where a low visibility product is essential.

BIRD WIRE 2000™ consists of a nylon coated wire tensioned by springs between stainless steel posts, which when mounted, offers an unstable landing area for large pest birds.

Advantages

  • Low cost
  • Low Profile/Low Visibility
  • Ideal for light to medium bird pressure
  • Deters Pigeons, Seagulls and larger birds from landing
  • Five year guarantee
Purpose
For ledges and areas where large birds have been temporarily "resting", and where a low profile (low visibility) product is essential.

Bird Pressure
Light to Medium

Bird Type
Pigeons, Seagulls and Larger Birds

Installation Tips

  1. Measure carefully the width of the ledge or surface where the Bird Wire is to be installed.
  2. The first row of Bird Wire should be no more than 1" from the edge of the ledge.
  3. Rows of Bird Wire should be no more than 3" apart.
  4. The last row of Bird Wire should be no more than 1" from the back wall.
  5. It is best to stagger the height of rows of Bird Wire to enhance the destabilized landing surface.
  6. Bird Wire should not exceed 5 ft. from post to post, otherwise birds will be able to press down and defeat the wire.

    7. Bird Wire should be installed in 10 ft. sections (or less). A section is the length of wire between two anchor posts, including a center post at 5 ft. with a spring and tie down crimp.