Trim-Tex Inc.
3700 W. Pratt Ave.
Lincolnwood, IL 60712
Toll-Free: (800) 874-2333
Fax: (800) 644-0216
E-mail: catalog@trim-tex.com
Technical & Sales Contact: John Calderaro
johnc@trim-tex.com
Web site: www.trim-tex.com

CHAMFER PRODUCTS
Trim-Tex once again breaks new ground with the introduction of our complete line of Chamfer Products. If you’re tired of square corners, but like straight sharp lines, then Chamfer Bead may be exactly what you’re looking for. The chamfered edge softens the room while maintaining the crisp look of a square corner. The rigid vinyl corner is also safer than a sharp square metal corner. Those who have tried Chamfer Bead are calling it the modern look for the new millennium. The photo shown was created using Chamfer Bead on the outside corners, with 2 layers of drywall and Chamfer Stop to create the stepped effect.

CHAMFER BEAD™
Chamfer Bead is used to finish a standard 90º outside corner. Installs and finishes the same as Bullnose so there aren’t any new skills to teach.

CHAMFER STOP™
Always striving to give you more choices, Trim-Tex introduces Chamfer Stop, the perfect complement to Chamfer Bead. Chamfer Stop is designed to be installed after the drywall. There is no need to wrap the bead behind the drywall. Use Chamfer Stop for creating beautiful multilayer drywall effects. Instead of wood moldings, Chamfer Stop is perfect for finishing windows and doors.

CHAMFER 3 WAY™
Chamfer 3 Way is designed to finish an outside corner where 3 Chamfer Beads come together. Apply a little construction adhesive on the tabs to bond the Chamfer 3 Way corner to the Chamfer Beads. The ultimate in butt edge separation protection.
U.S. Patent # D431,304

CHAMFER MARKER™
Chamfer Marker allows you to cope 90º and 135º inside off angles quickly and easily. Lay the Chamfer Marker over Chamfer Bead or Chamfer Stop, make a pencil mark along the marking edge, snip with yellow aviation snips and you're done. You produce a perfect coped corner every  time.