![]()
 Combination louvers integrate stationary louver appearance and adjustable blades
in a single frame. Louver Type K8206 incorporates drainable stationary blades;
Louver Type K8306 utilizes architectural blade design; and, Louver Type K8406
offers drainable stationary blades and inhibits air infiltration when the adjustable
blade face closes against ethylene-propylene gaskets installed inside each jamb
frame. Airolite Architectural Louvers are assembled entirely by welding to ensure
optimum strength and durability required to resist vibration damage and eliminate
the potential for galvanic corrosion. Fluoropolymer and anodized finish coatings
are applied to Airolite Architectural Louvers only after each product is weld-assembled
to ensure that all exposed edges and surfaces received maximum protection. | Extruded Aluminum Combination Louvers | Motorized | Louver Depth | Blade Thickness | Frame Thickness | Free Area | Water Penetration Rating cfm (m3/s) | K8204 | 4" (101.6 mm) | 0.081" (2.06 mm) | 0.125" (3.18 mm) | 40% | 7,557 (3.59) | K8204E | 4" (101.6 mm) | 0.081" (2.06 mm) | 0.125" (3.18 mm) | 35% | 6,663 (3.15) | K8206 | 6" (152.4 mm) | 0.081" (2.06 mm) | 0.125" (3.18 mm) | 46% | 7,558 (3.56) | K8206A | 6" (152.4 mm) | 0.081" (2.06 mm) | 0.125" (3.18 mm) | 48% | 9,377 (4.40) | K8206E | 6" (152.4 mm) | 0.081" (2.06 mm) | 0.125" (3.18 mm) | 39% | 6,324 (2.98) | K8306 | 6" (152.4 mm) | 0.081" (2.06 mm) | 0.125" (3.18 mm) | 46% | 7,385 (3.53) | K8504 | 4" (101.6 mm) | 0.081" (2.06 mm) | 0.081" (2.06 mm | 46% | 6,118 (2.89 ) | K8506 | 6" (152.4 mm) | 0.081" (2.06 mm) | 0.081" (2.06 mm | 46% | 7,576 (3.59) | Gravity | | | | | | KN827 | 4" (101.6 mm) | 0.063" (1.60 mm) | 0.081" (2.06 mm) | 40% | Not Rated | KX827 | 4" (101.6 mm) | 0.063" (1.60 mm) | 0.081" (2.06 mm) | 40% | Not Rated | | See attached data sheets for physical characteristics and
performance data |
Airolite urges specifications that address each of the following points to minimize
conflicts in bidding and assure an installation in accordance with the designer’s
intent. Please refer to the attached 3-part specification for further information.
1. Louver Type Selection
a. Extruded Aluminum Combination Louvers 2. Material Selection
a. Extruded Aluminum (Alloy 6063-T5) 3. Method of Assembly
a. All-Welded Assembly 4. Method of Operation
a. Chain Operation
b. Hand Crank
c. Concealed Motor
d. Electrical Actuation
e. Pneumatic Actuation 5. Screen, Blank-Off & Insulated Panels
a. Screen Selection
1. Insect Screen
2. Bird Screen
b. Screen Frames - Removable extruded aluminum
c. Blank-Off & Insulated Panels
d. Air Filters & Filter Frames 6. Louver Accessories
a. Special Shapes - Not Recommended.
b. Hinged/Removable Louvers and Subframes
c. Frame Closure
d. Security Bars 7. Method of Installation
a. Explosion Relief Fasteners
b. Blind Mounting
c. Jamb Fasteners - Not Recommended
d. Strap Anchors - Not Recommended
e. Flat Flange
f. Clip Angle/Continuous Angle
For more than 85 years, Airolite has served as the innovative leader in the
design and manufacture of architectural louvers, grilles, screens and sun controls.
Contact us at www.airolite.com or 740-373-7676.
|