![]()
Fabricated metal stationary louvers are furnished with visible mullions joined
with an extruded aluminum "I" connector. Continuous blade louvers
utilize concealed blade braces and hidden vertical supports in place of jamb
frames to present uninterrupted horizontal blade appearance. Most designs are
available in special shapes and depths from 1-1/2" to 8". Fabricated metal adjustable louvers incorporate steel ball bearings and stainless
steel operator linkage sleeves. Solid bronze and stainless bearings are available
upon request.
Airolite Architectural Louvers are assembled entirely by welding to ensure optimum
strength and durability required to resist vibration damage and eliminate the
potential for galvanic corrosion. Fluoropolymer and anodized finish coatings are
applied to Airolite Architectural Louvers only after each product is weld-assembled
to ensure that all exposed edges and surfaces received maximum protection.
| Fabricated Stationary Louvers | Non-Drainable Blade | Louver Depth | Blade Thickness | Frame Thickness | Free Area | Water Penetration
Rating cfm (m3/s) | 601C | 4" (101.6 mm) | 0.063" (1.60 mm) | 0.063" (1.60 mm) | 29% | 4,640 (2.19) | | Drainable Blade | | | | | | 6774/FCB6774 | 4" (101.6 mm) | 0.063" (1.60 mm) | 0.063" (1.60 mm) | 52% | 8,737 (4.12) | 6776/FCB6776 | 6" (152.4 mm) | 0.063" (1.60 mm) | 0.063" (1.60 mm) | 57% | 11,375 (5.37) | Fabricated Adjustable Louvers | Motorized | Louver Depth | Blade Thickness | Frame Thickness | Free Area | Water Penetration
Rating cfm (m3/s) | 625 | 5 1/2" (139.7 mm) | 0.063" (1.60 mm) | 0.063" (1.60 mm) | 69% | Not Rated | 645 | 4" (101.6 mm) | 0.063" (1.60 mm) | 0.063" (1.60 mm) | 37% | 4,098 (1.93) | 6456 | 6" (152.4 mm) | 0.063" (1.60 mm) | 0.063" (1.60 mm) | 39% | 4,467 (2.11) | 6784 | 4" (101.6 mm) | 0.063" (1.60 mm) | 0.063" (1.60 mm) | 37% | 6,494 (3.07) | 6785 | 6" (152.4 mm) | 0.063" (1.60 mm) | 0.063" (1.60 mm) | 44% | 6,968 (3.29) | 6786 | 6" (152.4 mm) | 0.063" (1.60 mm) | 0.063" (1.60 mm) | 55% | 8,410 (3.97) | | See attached data sheets for physical characteristics and
performance data |
Airolite urges specifications that address each of the following points to minimize
conflicts in bidding and assure an installation in accordance with the designer’s
intent. Please refer to the attached 3-part specification for further information. 1. Louver Type Selection
a. Fabricated Metal Stationary Blade Louvers - visible mullion
b. Fabricated Metal Stationary Blade Louvers - continuous blade
c. Fabricated Metal Adjustable Blade Louvers 2. Material Selection
a. Galvanized Steel or other Fabricated Metal 3. Method of Assembly
a. All-Welded Assembly 4. Method of Operation
a. Manual Operator
b. Chain Operator With Fusible Link
c. Concealed Hand Crank
d. Concealed Motor
e. Electrical Actuation
f. Pneumatic Actuation 5. Screen, Blank-Off & Insulated Panels
a. Screen Selection
1. Insect Screen
2. Bird Screen
b. Screen Frames - Removable extruded aluminum
c. Blank-Off & Insulated Panels
d. Air Filters & Filter Frames 6. Louver Accessories
a. Special Shapes
b. Hinged/Removable Louvers and Subframes
c. Frame Closure
d. Security Bars 7. Method of Installation
a. Explosion Relief Fasteners
b. Blind Mounting
c. Jamb Fasteners
d. Strap Anchors
e. Flat Flange
f. Clip Angle/Continuous Angle AIROLITE
For more than 85 years, Airolite has served as the innovative leader in the
design and manufacture of architectural louvers, grilles, screens and sun controls.
Contact us at www.airolite.com or 740-373-7676.
|