Structural Steel Column Anchoring Systems Column Flanges Parallel To Wall No. 189 L-Type Column Anchor No. 190 Strap-Type Column Anchor No. 194 Bar-Type Column Anchor No. 196 Corrugated-Type Column Anchor No. 216 Wire-Type Column Anchor No. 315 Weld-On Anchor Rod No. 316 Triangle Tie Column Flanges Perpendicular To Wall No. 193 Twisted Stap-Type Column Anchor No. 195 Twisted L-Type Column Anchor No. 197-T Twisted Corrugated Column Anchor No. 217 Wire-Type Column Anchor Heckmann Building Products offers a variety of column anchors for anchoring masonry walls to structural steel columns. Steel Specifications STAINLESS STEEL: Stainless Steel provides the greatest level of corrosion resistance in most building environments, and is especially recommended for use with light colored stone subject to staining. Sheet: ASTM A 167 and ASTM A 240, Type 304, ASTM A167-96. Plate, Bars, and Shapes: ASTM A 167, ASTM A 666, ASTM A 276 or ASTM A 479, Type 304. Wire: ASTM A 580, ASTM A 479, Type 304, Annealed and Ground. HOT DIP GALVANIZED AFTER FABRICATION: ASTM A 153. These heavy zinc coatings are applied after fabrication to assure that welds and exposed edges are plated. They are frequently specified for exposed conditions and critical exterior wall applications. Specify type of uncoated steel to be used. Class B-1: 2.00 avg. oz/sq.ft. zinc Class B-2: 1.50 avg. oz/sq.ft. zinc Class B-3: 1.30 avg. oz/sq.ft. zinc MILL GALVANIZED: Mill Galvanized before fabrication, these coatings provide a balance between economy and corrosion resistance. Sheets: ASTM A 653 (Formerly ASTM A 525), ASTM A 653 CQ (Formerly ASTM A 526), or ASTM A 653 LFQ (Formerly ASTM 527). Wire: ASTM A 641, ASTM A641/A 641M-91. PLAIN STEEL: Plain steel can be considered when welding would make plated anchors and ties impractical, or when parts will be galvanized after fabrication. Uncoated steel is not recommended for exterior walls or locations subject to moisture. Wire: ASTM A 82. Product Specifications No. 189 L-Type Column Anchor: 7" (178 mm) long x 2" (51 mm) wide x 1/8" (3.17 mm) thick x 1-1/2" (38 mm) bend. Standard flange slot is 5/8" (16 mm) wide x 1" (25.4 mm) deep x 1" (25.4 mm) from end. (Order in pairs with one left and one right anchor.) Available Mill Galvanized, Hot Dip Galvanized after Fabrication, and Stainless Steel. (Detailed test data available on this product.) No. 190 Strap-Type Column Anchor: 7" (178 mm) long x 2" (51 mm) wide x 1/8" (3.17 mm) thick x 1-1/2" (38 mm) foldback. Standard flange slot is 5/8" (16 mm) wide x 1" (25.4 mm) deep x 1" (25.4 mm) from end. Corrugated wall tie is 22 gage x 1" (25.4 mm) wide x 24" (610 mm) long. (Order in sets of left & right anchors and a wall tie.) Available Mill Galvanized, Hot Dip Galvanized after Fabrication, and Stainless Steel. No. 194 Bar-Type Column Anchor: 6" (152 mm) long x 1" (25.4 mm) wide x 1/4" (6.35 mm) thick x 2" (51 mm) bend on flange and 1-1/4" (32 mm) bend into masonry, electro-galvanized after fabrication. Weld to structural steel. (Order in pairs.) Available Mill Galvanized, Hot Dip Galvanized after Fabrication, and Stainless Steel. No. 196 Corrugated-Type Column Anchor: 7" (178 mm) long x 2" (52 mm) wide x 1/8" (3.17 mm) thick with 4-1/2" (114 mm) of corrugation. (Order by piece, anchors are reversible for left or right hand use.) Available Mill Galvanized, Hot Dip Galvanized after Fabrication, and Stainless Steel. No. 216 Wire-Type Column Anchor: 3" (76 mm), 5" (127 mm), 7" (178 mm), and 9" (229 mm) lengths from inside of flange slot to masonry bend x 3/16" (4.76 mm) or 1/4" (6.35 mm) diameter wire. Standard flange slot is 1/2" (12.7 mm) x 2-1/2" (63.5 mm). Bend is 2" (51 mm). (Order by piece.) Available Mill Galvanized, Hot Dip Galvanized after Fabrication, and Stainless Steel. (Detailed test data available on this product.) 
No. 315 Weld-On Anchor Rods:
1/4" dia. (6.35 mm) x 9" (229 mm) long or 5" (127 mm) long. Plain Steel
or Hot Dip Galvanized after Fabrication. (Detailed test data available
on this product.)
No. 316 Triangle Wire Ties: 3/16" dia. (4.76 mm) wire. Also available in 1/4" dia. (6.35 mm). Closed end is 1" (25.4 mm) wide. Standard Lengths are 3" (76 mm), 4" (102 mm), 5" (127 mm), 7" (178 mm), 9" (229 mm), and 11" (279 mm). Available Mill Galvanized, Hot Dip Galvanized after Fabrication, and Stainless Steel. (Detailed test data available on this product.) No. 193 Twisted Strap-Type: Length required x 1-1/4" (32 mm) wide x 1/8" (3.17 mm) thick x 1-1/2" (38 mm) foldback. Specify length from hook to start of twist. Corrugated wall tie is 22 gage x 1" (25.4 mm) wide x 24" (610 mm) long. (Order in sets of left & right anchors and a wall tie.) Available Mill Galvanized, Hot Dip Galvanized after Fabrication, and Stainless Steel. No. 195 Twisted L-Type Column Anchor: Length required x 1-1/4" (32 mm) wide x 1/8" (3.17 mm) thick x 1-1/2" (38 mm) bend. (Specify length from hook to start of twist.) Available Mill Galvanized, Hot Dip Galvanized after Fabrication, and Stainless Steel. No. 197-T Twisted Corrugated Column Anchor: Specify overall Length and Length from hook to start of twist. 1-1/4" (32 mm) x 1/8" (3.17 mm) thick. (Order by pieces, anchors are reversible.) Available Mill Galvanized, Hot Dip Galvanized after Fabrication, and Stainless Steel. No. 217 Wire-Type Column Anchor: 10" (254 mm), 12" (305 mm), 14" (356 mm), and 16" (406 mm) long from inside of flange slot to masonry bend x 3/16" (4.76 mm) or 1/4" (6.35 mm) diameter wire. Standard flange slot is 1/2" (12.7 mm) x 2-1/2" (63.5 mm). (Order by pieces.) Available Mill Galvanized, Hot Dip Galvanized after Fabrication, and Stainless Steel. Heckmann Building Products Inc.
|