(Dry-Set Mortar For Porcelain Tiles)
Porcelain Set is specifically formulated for the installation of impervious porcelain, large format
tile and glass mosaics. For tiles in service of commercial and residential use on walls and floors.
(Dry-Set Mortar For Demanding Installations)
A premium dry-set mortar, formulated with supreme working characteristics such as open time, pot life and coverage. Ideal for use in hot and dry climates.
(Floor/ Wall Thin-Set Mortar)
Specially Formulated for the installation of ceramic, mosaic, quarry tiles and dimension stone (absorptive, semi-vitreous and vitreous) tiles for service in commercial and residential use on both wall and floor installations.
(Dry-Set Mortar For Low Absorption tiles)
Specially Formulated for the installation of ceramic, mosaic, quarry tiles and dimension stone (absorptive and semi-vitreous) tiles for service in commercial and residential use on both wall and floor installations.
(Flexible Latex-Portland Cement Mortar)
Formulated for installation of floor and wall tiles, both interior and exterior over properly prepared exterior grade plywood, glass mesh mortar units and concrete surfaces. This super polyermerized mortar is designed to be used for installation requiring high performance and provides greater coverage with excellent handling characteristics.
(Contractor Grade Latex-Portland Cement Mortar)
Contract grade Latex-Portland Cement Mortar designed for the installation of all types of tiles over a variety of substrates. May be used for either floors or walls in both interior and exterior application where a Latex-Portland Cement Mortar is recommended. Re-dispersible powder additives are used to improve adhesion, reduce water absorption and provide greater bond strength and resistance to impact and shock. These additives allow for some latitude in time, working conditions and temperature.
SGM Multi-Crete is a contractor grade Latex-Portland Cement Mortar designed for installation of all types of tiles over a variety of substrates. It may be used for either floors or walls in both interior or exterior applications where a Latex-Portland Cement Mortar is required.
(Medium Bed Latex-Portland Cement Mortar)
Factory blend of Portland cement, sand, and light weight fillers. Designed for use as a light weight plaster substrate bedding (browncoat) which does not place additional dead load on structural members. Eliminates costly job-site mixing of sand/ cement mixes.
Fast Set Thinset is a Portland Cement dry set mortar formulated to produce a rapid set time when installing ceramic, mosaic, pavers and quarry tiles. Fast Set will allow grouting within two to four hours and open to traffic within six hours.
(For Installing Glass)
Blocks Special blend of portland cement, graded aggregates and proprietary chemicals formulated specifically for the installation of Glass Blocks; Computerized batching of raw materials insures a high quality mortar eliminating guesswork of jobsite mixes.
(For Installing Cork & Felt Underlayments)
Premium latex based adhesive which provides a strong, water resistant bond for cork flooring underlayment, wall tiles and felt underlayment.
(Contractor Grade Type 1 Adhesive (White))
A contractor grade, white latex-based adhesive, designed to be used for setting ceramic tile on interior walls and floors. That should complete the Product Information Sheet area.
(Dry-Set Mortar or Bond Coat )
Specifically formulated for installation of vitreous an/ or low absorption tiles.
Acrylic Mortar Additive - An acrylic additive formulated for use as a direct replacement for water with any Dry-Set mortars and non-polymer modified portland cement grouts and joint fillers. SC 25 Enhances all physical characteristics, such as bond, shear bond, and flextural strengths.
(Latex Admix For Improved Physical Properties)
Special blend of latex, formulated for use as a direct replacement for all or part of gauging water with non-polymer modified underlayments, mortars and grouts. Will significantly improve all physical properties such as compressive, bond and flexural strengths.
(Crete Admix)
Polymer additive designed to be used with Portland cement and sand to make hi strength thin set mortars. Will give you a chemical, frost and shock resistant mortar and when properly installed will provide permanent, trouble free installations.
(Rapid Setting Admix)
Acylic latex additive formulated for direct use in SGM sanded Thin Set, Floor Set, and Wall Set. TCA Formulated Thin Set 759 or 763, unsanded thinsets and factory prepared grouts, which will allow you to set and grout the very same day.
(Elestomeric Mortar & Antifracture Membrane)
Unique new elastomeric mortar formulated for the installation of ceramic tile and dimension stone. This system is composed of an acrylic additive ( Part A) and Portland cement powder (Part B) that when trowel applied creates an isolation membrane that is designed to prevent already existing cracks in the substrate from transferring through the tie installation.
(Installing Marble & Dimension Stone Tiles)
A white non-staining adhesive which will bond marble, dimension stone and ceramic tiles over structurally sound, firm, dry surfaces such as gypsum, wall panels, concrete, glass mesh mortar units, (APA) exterior grade plywood on interior surfaces.
(Premium Type 1 Adhesive (White))
White acrylic latex based adhesive which will bond ceramic tiles to structurally sound, firm, dry surfaces such as Gypsum wall panels, exterior grade plywood, concrete, glass mesh, mortar units and old properly prepared floor tile or terrazzo. Non-flammable and emits no toxic fumes. Sets with a long lasting plastic grip, spreads esily, is water resistant when dry and is freeze/ thaw stable for storage. Several formulations are available.
(Contractor Grade Wall Adhesive (White))
Latex based mastic which will bond ceramic wall tile to most structurally sound, level, dry and clean interior surfaces such as gypsum wallboard and plaster. This material is non-flammable, emits no toxic fumes, spreads easily and sets with a long lasting elastic grip. When dry, it has excellent water resistance and is freeze/ thaw stable for storage. Several formulations are available.
SGM supports and demonstrates building project sustainability by offering products that contribute to LEED® program points for certification.
SGM
Southern Grouts & Mortars, Inc.
HeadQuarters
1502 S.W 2nd Place
Pompano Beach, FL 33069
Phone: 800-641-9247, 954-943-2288
Fax: 954-443-2402
Website: www.sgm.cc
Email: sales@sgm.cc
|