![]() ![]() DEX-O-TEX Crossfield Products Corp. 140 Valley Road 3000 E. Harcourt St. DEX-O-TEX WEATHERWEAR 1.) PRODUCT DESCRIPTION A) Composition The material is applied in a series of troweled coatings which form, successively, an elastic latex membrane, an integral composition flashing, and a flexible rubber-cement traffic surface. A unique "slip-sheet" divorces the Dex-O-Tex application from the surface it covers and permits it to "float" over normal building cracks and movement. Dex-O-Tex Weatherwear components are all individual combinations of liquid rubber latex polymers incorporating dehydrating powders, vulcanizers, and special aggregates. The total thickness of the material is 3/16" - 1/4" (4,7 mm - 6,35 mm). It can be applied over plywood or concrete. After suitable preparation, it may be installed over existing promenade surfaces of various types, such as quarry tile, flagstone, etc. When applied over plywood in cold climates, a direct bond application may be substituted for the slip-sheet feature. Consult Crossfield Products Corp. for recommendations. Dex-O-Tex Weatherwear is available in a wide range of standard colors. Dex-O-Tex Weatherwear is fire-retardant and is approved as such by the following agencies: International Conference of California State Fire Marshal, City of Los Angeles Research Report B) Typical Uses C) Advantages – Limitations Advantages Limitations 2.) PHYSICAL CHARACTERISTICS AND TECHNICAL DATA See table on this screen. 3.) INSTALLATION A) Over dry, suitably-pitched sub-surfaces, apply Dex-O-Tex slip-sheet. Coat top of slip-sheet with Dex-O-Tex bonding coat. For Substrate Preparation: See Dex-O-Tex Weatherwear Architectural Information Sheet and Dex-O-Tex Weatherwear Detail Drawings for particulars. Generally, all surfaces must be clean, dry, firm and pitched for drainage (minimum 1/8" per foot). Note: Special Dex-O-Tex Drains are available from most major drain manufacturers. These should be used in conjunction with Dex-O-Tex Weatherwear. Consult Crossfield Products Corp. for current listings and plumbing roughings. 4.) PRODUCT AVAILABILITY Crossfield Products Corp. maintains offices and/or factories at all addresses listed above. Qualified Dex-O-Tex Contractors are established in all major trading areas in the United States, Canada and various European and Far Eastern nations. 5.) MAINTENANCE After period of weathering or traffic (generally several years), apply roller coat of surface dressing. 6.) SPECIFICATION ASSISTANCE Consult Crossfield Products Corp. for specification assistance, color charts, detail drawings, etc. This consultation is highly recommended prior to specification. |