UltraPly TPO Accessories Firestone UltraPly has always aimed to fulfill the TPO installation needs of roofing professionals. See below for Firestone's extensive line of UltraPly TPO accessories. 
UltraPly TPO 8" Reinforced Cover Strip
UltraPly TPO 8" Reinforced Cover Strip, made from 60-mil UltraPly TPO membrane, can be used for intermediate mechanical attachment and to strip in TPO XR end laps. Pre-cut into 50-foot ready-to-use rolls, this reinforced cover strip can provide faster installation and savings due to reduced labor time. 
UltraPly TPO Reinforced Curb Corners
Constructed of 45-mil UltraPly TPO membrane, UltraPly TPO Reinforced Curb Corners have a six-inch flange that help ensure adequate weld area around the perimeter of the curb. This product is available in six sizes to accommodate multiple curb sizes and will allow for faster installations. 
UltraPly TPO QuickSeam 9 1/2" Flashing
This product utilizes Firestone Non-Staining QuickSeam pressure sensitive tape technology to ensure consistent application during installation. UltraPly TPO QuickSeam 9 1/2 inch flashing is an easy-to-apply product provides contractors with a non-welded option for TPO roof edge details. This product can also be adapted for use as a coverstrip for intermediate mechanical attachment on UltraPly TPO systems. UltraPly TPO Premium Walkway Pads Available in 30" wide by 50' long rolls, the walkway pads have a slip-resistant textured surface for rooftop safety and a smooth bottom surface allowing for easy welding to Firestone's UltraPly TPO roof membrane. Firestone's UltraPly TPO Premium Walkway Pads are composed of a non-reinforced thermoplastic material and help reduce damage caused by rooftop foot traffic. 
UltraPly QuickSeam Reinforced Mechanically Attached Strip
UltraPly QuickSeam Reinforced Mechanically Attached Strip is constructed with Non-Staining White QuickSeam pressure sensitive tape technology and can be installed using conventional UltraPly TPO HD Seam Plates, metal or polymer batten strips. This non-penetration intermediate attachment can be used for roofing membranes up to 12 feet for perimeter installations. 
TPO QuickSeam Flashing
This laminated 5 1/2 inch TPO flashing membrane is pre-applied with Non-Staining QuickSeam pressure sensitive tape technology that ensures even attachment. Welding time during membrane installation and flashing details is reduced due to the ease of application of the product. 
UltraPly QuickSeam Reinforced Perimeter Fastening Strip
Ultraply QuickSeam Reinforced Perimeter Fastening Strip can be simply installed using conventional UltraPly TPO HD Seam Plates. Made from UltraPly TPO membrane and Non-Staining White QuickSeam pressure sensitive tape, this product is a non-penetrating membrane that offers securement with angle changes in the installation process. 
UltraPly QuickSeam Outside Corner
Molded from UltraPly TPO and Non-Staining QuickSeam pressure sensitive tape, UltraPly QuickSeam Outside Corner allows for easy, even application that requires no heat welding. This product has extra wide flange to ensure sufficient corner coverage. 
UltraPly QuickSeam Pipe Boot
Using pre-applied Non-Staining QuickSeam pressure sensitive tape technology, this product can be installed with no heat welding and offers ease of application when adding additional pipe penetrations to existing roofs. Molded from UltraPly TPO compound, UltraPly QuickSeam Pipe Boot covers pipes ranging from one inch to six inches in diameter. 
UltraPly QuickSeam T-Joint Covers
UltraPly QuickSeam T-Joint Covers are molded from UltraPly TPO compounds and are pre-applied with Non-Staining QuickSeam pressure sensitive tape that reduces welding time during installation. Firestone Building Products Company |