Tectum I Plank, Tile, CTD and Tectum IIIP

Tectum Roof Plank with a T&G edge is available in all Tectum roof deck systems. Tectum Long Span Plank, available only in Tectum I panel, uses a 16 gauge galvanized steel channel for increased spans. These products are typically used in low-slope applications.

Roof Deck Tile

Tectum Roof Deck Tile uses any of the Tectum panels to span between steel bulb tees. The rabbeted edges of Tectum tile rest on steel tee flanges. Spaces between tile and tees are filled with Tectum grout for excellent anchorage and wind uplift resistance. Custom lengths allow roof design with no exposed end joints.

Tectum I – CTD (Concealed Tee Deck) system uses a 3" thick Tectum I panel kerfed to accept a maximum size #218 bulb tee. The flanges of the steel tee are concealed in the body of the Tectum panel. The Tectum CTD system allows spans up to 10' without visible edge support.

Tectum IIIP roof deck has an edge detail specifically designed for use over high-humidity applications such as swimming pools and ice arenas. This detail, when properly sealed with urethane adhesive, provides for a continuous vapor retarder from panel to panel in all directions.

* Contact Tectum Inc. when designing high-humidity environments such as pools and ice arenas.