- RS-405L-PL with 1/2" Photoluminescent Insert
- RS-405L-PL-100 with 1" Photoluminescent Insert
- Mill finish aluminum extrusion with Photoluminescent Insert
- Sold in 2" increments, 36" - 120", maximum 10 ft. lengths
- Select abrasive strip color from chart
- Select optional anodized aluminum color from chart
- MEA-243-05-M VOL. II
- BR: 106-29-20
NOTE: Finished nosings have slightly rounded ends. Optional Square ends available.
- Exceeds New York City RS 6-1 and RS 6-1A Brightness Rating Requirements
- Highly durable and built for permanent installation inside or outside. UV stable
- Easy, permanent installation
- Easy clean – no other maintenance required
- Non-flammable (fire resistant)
- Non-toxic
- Not radioactive
- Passes RS 6-1 Illuminence Test ISO 17398 (NYC minimum BR: 30-8-5)
- Passes ASTM E2072-00
- Meets ICC-ES AC169
- Passed Weatherometer (2000 hour ASTM G155) and Salt Spray (ASTM B117) tests
- Screws and Anchors supplied
- Passes RS 6-1 cleaning test – ASTM D 4828 – RESULT 10 (no residual soiling or staining – highest possible score, minimum required, requirement – 5)
- Passes RS 6-1 flame spread test – ASTM D 635
- Passes RS 6-1 toxicity test – Bombardier SMP800-C
- Passes RS 6-1 radioactivity tests ASTM D3648
- Note RS 6-1 UV testing will complete late 2005 (Has already passed relevant Weatherometer (2000 hour ASTM G155) and Salt Spray (ASTM B117) tests
- Uses recommended polyurethane adhesive. Contact us for installation instructions
Balco, Inc.
2626 S. Sheridan
Wichita, KS 67217
Phone: 800-767-0082
316-945-0789
E-mail: info@balcousa.com
Website: www.balcousa.com
|